ARM: omap: clean redundant PISMO_xx macros used in OMAP3

[platform/kernel/u-boot.git] / include / configs / am3517_evm.h

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6500878..a9c5a8f 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -58,6 +58,11 @@
  */
 
 /*
+ * OMAP GPIO configuration
+ */
+#define CONFIG_OMAP_GPIO
+
+/*
  * NS16550 Configuration
  */
 #define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
@@ -136,13 +141,23 @@
 #undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
+
+/*
+ * Ethernet
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT         10
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -231,7 +246,6 @@
  */
 #define CONFIG_SYS_TIMERBASE           OMAP34XX_GPT2
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ                  1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -245,25 +259,19 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors */
                                                /* on one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 
 #define CONFIG_NAND_OMAP_GPMC
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_ENV_IS_IN_NAND          1
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
@@ -335,6 +343,7 @@
                                                10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000