Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / am3517_evm.h

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 7ccb286..b75c648 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -14,52 +14,18 @@
 
 #include <configs/ti_omap3_common.h>
 
-#define CONFIG_REVISION_TAG
-
-/* Hardware drivers */
-
-/*
- * USB configuration
- * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
- * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
- */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_USB_EHCI_OMAP
-#else
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       57
-#endif
-
-/* I2C */
-
-/* Ethernet */
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT         10
-
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS         { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
+#define CFG_SYS_NAND_ECCPOS            { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
                                         11, 12, 13, 14, 16, 17, 18, 19, 20, \
                                         21, 22, 23, 24, 25, 26, 27, 28, 30, \
                                         31, 32, 33, 34, 35, 36, 37, 38, 39, \
                                         40, 41, 42, 44, 45, 46, 47, 48, 49, \
                                         50, 51, 52, 53, 54, 55, 56 }
 
-#define CONFIG_SYS_NAND_ECCSIZE                512
-#define CONFIG_SYS_NAND_ECCBYTES       13
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_MAX_OOBFREE    2
-#define CONFIG_SYS_NAND_MAX_ECCPOS     56
-#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
+#define CFG_SYS_NAND_ECCSIZE           512
+#define CFG_SYS_NAND_ECCBYTES  13
+#define CFG_SYS_NAND_U_BOOT_START      CONFIG_TEXT_BASE
 /* NAND block size is 128 KiB.  Synchronize these values with
  * corresponding Device Tree entries in Linux:
  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
@@ -72,10 +38,7 @@
 #endif /* CONFIG_MTD_RAW_NAND */
 
 /* Environment information */
-
-#define CONFIG_BOOTFILE                "uImage"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
        "console=ttyS2,115200n8\0" \
        "fdtfile=am3517-evm.dtb\0" \
@@ -84,8 +47,6 @@
        "bootenv=uEnv.txt\0" \
        "cmdline=\0" \
        "optargs=\0" \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "mmcdev=0\0" \
        "mmcpart=1\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -118,65 +79,17 @@
                "nand read ${fdtaddr} aa0000 80000; " \
                "bootm ${loadaddr} - ${fdtaddr}\0" \
 
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "echo SD/MMC found on device $mmcdev; " \
-               "if run loadbootenv; then " \
-                       "run importbootenv; " \
-               "fi; " \
-               "echo Checking if uenvcmd is set ...; " \
-               "if test -n $uenvcmd; then " \
-                       "echo Running uenvcmd ...; " \
-                       "run uenvcmd; " \
-               "fi; " \
-               "echo Running default loadimage ...; " \
-               "setenv bootfile zImage; " \
-               "if run loadimage; then " \
-                       "run loadfdt; " \
-                       "run mmcboot; " \
-               "fi; " \
-       "else run nandboot; fi"
-
 /* Miscellaneous configurable options */
 
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS             64
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
-                                       + sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-
 /* memtest works on */
 
-/* Physical Memory Map */
-#define CONFIG_SYS_CS0_SIZE            (256 * 1024 * 1024)
-
 /* FLASH and environment organization */
 
 /* **** PISMO SUPPORT *** */
-#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors */
                                                /* on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FLASH_BASE          NAND_BASE
+#define CFG_SYS_FLASH_BASE             NAND_BASE
 #endif
 
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-
-/* Defines for SPL */
-
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-
 #endif /* __CONFIG_H */