Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / alt.h

diff --git a/include/configs/alt.h b/include/configs/alt.h
index f5e41db..8f03762 100644 (file)
--- a/include/configs/alt.h
+++ b/include/configs/alt.h
@@ -1,93 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/configs/alt.h
  *     This file is alt board configuration.
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #ifndef __ALT_H
 #define __ALT_H
 
-#undef DEBUG
-#define CONFIG_ARCH_RMOBILE_BOARD_STRING "Alt"
-
 #include "rcar-gen2-common.h"
 
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR                0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR                0xE633FFFC
-#endif
-#define STACK_AREA_SIZE                        0xC000
+#define STACK_AREA_SIZE                        0x00100000
 #define LOW_LEVEL_MERAM_STACK \
-               (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+               (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
 
 /* MEMORY */
 #define RCAR_GEN2_SDRAM_BASE           0x40000000
 #define RCAR_GEN2_SDRAM_SIZE           (1024u * 1024 * 1024)
 #define RCAR_GEN2_UBOOT_SDRAM_SIZE     (512 * 1024 * 1024)
 
-/* SCIF */
-
-/* FLASH */
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH_QUAD
-
 /* SH Ether */
-#define CONFIG_SH_ETHER_USE_PORT       0
-#define CONFIG_SH_ETHER_PHY_ADDR       0x1
-#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SH_ETHER_CACHE_WRITEBACK
-#define CONFIG_SH_ETHER_CACHE_INVALIDATE
-#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
+#define CFG_SH_ETHER_USE_PORT  0
+#define CFG_SH_ETHER_PHY_ADDR  0x1
+#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CFG_SH_ETHER_CACHE_WRITEBACK
+#define CFG_SH_ETHER_CACHE_INVALIDATE
+#define CFG_SH_ETHER_ALIGNE_SIZE       64
 
 /* Board Clock */
-#define RMOBILE_XTAL_CLK        20000000u
-#define CONFIG_SYS_CLK_FREQ     RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ  (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ    (CONFIG_SYS_CLK_FREQ * 156 / 2)
-#define CONFIG_P_CLK_FREQ      (CONFIG_PLL1_CLK_FREQ / 24)
-
-#define CONFIG_SYS_TMU_CLK_DIV  4
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS       3
-#define CONFIG_SYS_I2C_SH_SPEED0       400000
-#define CONFIG_SYS_I2C_SH_SPEED1       400000
-#define CONFIG_SYS_I2C_SH_SPEED2       400000
-#define CONFIG_SH_I2C_DATA_HIGH                4
-#define CONFIG_SH_I2C_DATA_LOW         5
-#define CONFIG_SH_I2C_CLOCK            10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-
-/* MMCIF */
-#define CONFIG_SH_MMCIF
-#define CONFIG_SH_MMCIF_ADDR           0xee200000
-#define CONFIG_SH_MMCIF_CLK            48000000
-
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA      0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA      0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA      0x00000180
-/* SCIF2 */
-#define CONFIG_SMSTP7_ENA      0x00080000
 
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ            97500000
+#define CFG_EXTRA_ENV_SETTINGS \
+       "bootm_size=0x10000000\0"       \
+       "usb_pgood_delay=2000\0"
 
 #endif /* __ALT_H */