rename CFG_ macros to CONFIG_SYS

[platform/kernel/u-boot.git] / include / configs / actux3.h

diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index fc2d02f..3f42ed4 100644 (file)
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -32,7 +32,7 @@
 #define CONFIG_DISPLAY_CPUINFO         1
 #define CONFIG_DISPLAY_BOARDINFO       1
 
-#define CFG_IXP425_CONSOLE             IXP425_UART2
+#define CONFIG_SYS_IXP425_CONSOLE              IXP425_UART2
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_BOOTDELAY               3
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
@@ -43,9 +43,9 @@
 #undef CONFIG_USE_IRQ
 
 /* Size of malloc() pool */
-#define CFG_MALLOC_LEN                 (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN                  (CONFIG_ENV_SIZE + 128*1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE              128
+#define CONFIG_SYS_GBL_DATA_SIZE               128
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -69,30 +69,30 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CFG_LONGHELP
-#define CFG_PROMPT                     "=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT                      "=> "
 /* Console I/O Buffer Size */
-#define CFG_CBSIZE                     256
+#define CONFIG_SYS_CBSIZE                      256
 /* Print Buffer Size */
-#define CFG_PBSIZE                     (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE                      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
-#define CFG_MAXARGS                    16
+#define CONFIG_SYS_MAXARGS                     16
 /* Boot Argument Buffer Size */
-#define CFG_BARGSIZE                   CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE                    CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START              0x00400000
-#define CFG_MEMTEST_END                        0x00800000
+#define CONFIG_SYS_MEMTEST_START               0x00400000
+#define CONFIG_SYS_MEMTEST_END                 0x00800000
 
 /* everything, incl board info, in Hz */
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 /* spec says 66.666 MHz, but it appears to be 33 */
-#define CFG_HZ                         3333333
+#define CONFIG_SYS_HZ                          3333333
 
 /* default load address */
-#define CFG_LOAD_ADDR                  0x00010000
+#define CONFIG_SYS_LOAD_ADDR                   0x00010000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE             { 9600, 19200, 38400, 57600, \
+#define CONFIG_SYS_BAUDRATE_TABLE              { 9600, 19200, 38400, 57600, \
                                          115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE       1
 
@@ -108,39 +108,39 @@
 #endif
 
 /* Expansion bus settings */
-#define CFG_EXP_CS0                    0xbd113442
+#define CONFIG_SYS_EXP_CS0                     0xbd113442
 
 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM_1                   0x00000000
-#define CFG_DRAM_BASE                  0x00000000
+#define CONFIG_SYS_DRAM_BASE                   0x00000000
 
 /* 16MB SDRAM */
-#define CFG_SDR_CONFIG                 0x3A
+#define CONFIG_SYS_SDR_CONFIG                  0x3A
 #define PHYS_SDRAM_1_SIZE              0x01000000
-#define CFG_SDRAM_REFRESH_CNT          0x81a
-#define CFG_SDR_MODE_CONFIG            0x1
-#define CFG_DRAM_SIZE                  0x01000000
+#define CONFIG_SYS_SDRAM_REFRESH_CNT           0x81a
+#define CONFIG_SYS_SDR_MODE_CONFIG             0x1
+#define CONFIG_SYS_DRAM_SIZE                   0x01000000
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS            1
+#define CONFIG_SYS_MAX_FLASH_BANKS             1
 /* max number of sectors on one chip */
-#define CFG_MAX_FLASH_SECT             140
+#define CONFIG_SYS_MAX_FLASH_SECT              140
 #define PHYS_FLASH_1                   0x50000000
-#define CFG_FLASH_BANKS_LIST           { PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_BANKS_LIST            { PHYS_FLASH_1 }
 
-#define CFG_FLASH_BASE                 PHYS_FLASH_1
-#define CFG_MONITOR_BASE               PHYS_FLASH_1
-#define CFG_MONITOR_LEN                        (256 << 10)
+#define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN                 (256 << 10)
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* no byte writes on IXP4xx */
-#define CFG_FLASH_CFI_WIDTH            FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH             FLASH_CFI_16BIT
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Ethernet */
 
@@ -155,7 +155,7 @@
 /* MII PHY management */
 #define CONFIG_MII                     1
 /* Number of ethernet rx buffers & descriptors */
-#define CFG_RX_ETH_BUFFER              16
+#define CONFIG_SYS_RX_ETH_BUFFER               16
 #define CONFIG_RESET_PHY_R             1
 /* ethernet switch connected to MII port */
 #define CONFIG_MII_ETHSWITCH           1
@@ -173,7 +173,7 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE             32
+#define CONFIG_SYS_CACHELINE_SIZE              32
 
 /*
  * environment organization:
@@ -182,7 +182,7 @@
 #define        CONFIG_ENV_IS_IN_FLASH          1
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_ADDR                        (PHYS_FLASH_1 + 0x4000)
-#define CFG_USE_PPCENV                 1
+#define CONFIG_SYS_USE_PPCENV                  1
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \