+++ /dev/null
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5200
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_A3M071 /* ... on A3M071 board */
-#define CONFIG_MPC5200_DDR /* ... use DDR RAM */
-
-#define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */
-
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LOWBOOT /* Enable lowboot */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_REGINFO
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-/* define for 66MHz speed - undef for 33MHz PCI clock speed */
-#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE 8192
-
-#define OF_CPU "PowerPC,5200@0"
-#define OF_SOC "soc5200@f0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51
-
-/*
- * NOR flash configuration
- */
-#define CONFIG_SYS_FLASH_BASE 0xfc000000
-#define CONFIG_SYS_FLASH_SIZE 0x01000000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 0x10000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xf0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
-
-
-#define CONFIG_SYS_GBL_DATA_SIZE 128
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
- CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_SYS_MALLOC_LEN (1 << 20)
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC
-#define CONFIG_MPC5xxx_FEC_MII100
-#define CONFIG_PHY_ADDR 0x00
-
-/*
- * GPIO configuration
- */
-
-/*
- * GPIO-config depends on failsave-level
- * failsave 0 means just MPX-config, no digiboard, no fpga
- * 1 means digiboard ok
- * 2 means fpga ok
- */
-
-/* for failsave-level 0 - full failsave */
-#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005
-/* for failsave-level 1 - only digiboard ok */
-#define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C005
-/* for failsave-level 2 - all ok */
-#define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C005
-
-/*
- * Configuration matrix
- * MSB LSB
- * failsave 0 0x1005C005 00010000000001011100000001100101 ( full failsave )
- * failsave 1 0x1005C005 00010000000001011100000001100101 ( digib.-ver ok )
- * failsave 2 0x1005C005 00010000000001011100000001100101 ( all ok )
- * || ||| || | ||| | | | |
- * || ||| || | ||| | | | | bit rev name
- * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1
- * +-+++-++--+---+++-+---+---+---+- 1 30 LPTZ
- * ||| || | ||| | | | | 2 29 ALTs
- * +++-++--+---+++-+---+---+---+- 3 28 ALTs
- * ++-++--+---+++-+---+---+---+- 4 27 CS7
- * +-++--+---+++-+---+---+---+- 5 26 CS6
- * || | ||| | | | | 6 25 ATA
- * ++--+---+++-+---+---+---+- 7 24 ATA
- * +--+---+++-+---+---+---+- 8 23 IR_USB_CLK
- * | ||| | | | | 9 22 IRDA
- * | ||| | | | | 10 21 IRDA
- * +---+++-+---+---+---+- 11 20 IRDA
- * ||| | | | | 12 19 Ether
- * ||| | | | | 13 18 Ether
- * ||| | | | | 14 17 Ether
- * +++-+---+---+---+- 15 16 Ether
- * ++-+---+---+---+- 16 15 PCI_DIS
- * +-+---+---+---+- 17 14 USB_SE
- * | | | | 18 13 USB
- * +---+---+---+- 19 12 USB
- * | | | 20 11 PSC3
- * | | | 21 10 PSC3
- * | | | 22 9 PSC3
- * +---+---+- 23 8 PSC3
- * | | 24 7 -
- * | | 25 6 PSC2
- * | | 26 5 PSC2
- * +---+- 27 4 PSC2
- * | 28 3 -
- * | 29 2 PSC1
- * | 30 1 PSC1
- * +- 31 0 PSC1
- */
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "=> "
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024
-#else
-#define CONFIG_SYS_CBSIZE 256
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x00f00000
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_LOOPW
-#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI)
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS2_START 0xe0000000
-#define CONFIG_SYS_CS2_SIZE 0x00100000
-
-/* FPGA slave io (512kiB) - see ticket #66 */
-#define CONFIG_SYS_CS3_START 0xE9000000
-#define CONFIG_SYS_CS3_SIZE 0x00080000
-/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */
-#define CONFIG_SYS_CS3_CFG 0x0032B900
-
-/* Diagnosis Interface - see ticket #63 */
-#define CONFIG_SYS_CS4_START 0xEA000000
-#define CONFIG_SYS_CS4_SIZE 0x00000001
-/* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0002B900 */
-#define CONFIG_SYS_CS4_CFG 0x0002B900
-
-/* FPGA master io (64kiB) - see ticket #66 */
-#define CONFIG_SYS_CS5_START 0xE8000000
-#define CONFIG_SYS_CS5_SIZE 0x00010000
-/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */
-#define CONFIG_SYS_CS5_CFG 0x0032B900
-
-#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for pci_clk = 66 MHz */
-#define CONFIG_SYS_BOOTCS_CFG 0x0006F900
-#define CONFIG_SYS_CS1_CFG 0x0004FB00
-#define CONFIG_SYS_CS2_CFG 0x0006F90C
-#else /* for pci_clk = 33 MHz */
-#define CONFIG_SYS_BOOTCS_CFG 0x0002F900
-#define CONFIG_SYS_CS1_CFG 0x0001FB00
-#define CONFIG_SYS_CS2_CFG 0x0002F90C
-#endif
-
-#define CONFIG_SYS_CS_BURST 0x00000000
-/* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */
-/* R 7 R 6 R 5 R 4 R 3 R 2 R 1 R 0 */
-/* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */
-#define CONFIG_SYS_CS_DEADCYCLE 0x33030000
-
-#define CONFIG_SYS_RESET_ADDRESS 0xff000000
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \
- "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_SYS_OS_BASE 0xfc080000
-#define CONFIG_SYS_FDT_BASE 0xfc060000
-
-#define xstr(s) str(s)
-#define str(s) #s
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "verify=no\0" \
- "consoledev=ttyPSC0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0"\
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} " \
- "console=${consoledev},${baudrate}\0" \
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr} - ${fdtaddr}\0" \
- "flash_mtd=run mtdargs addip addtty;" \
- "bootm ${kernel_addr} - ${fdtaddr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \
- "net_nfs=sleep 2; tftp ${loadaddr} ${bootfile};" \
- "tftp c00000 ${fdtfile};" \
- "run nfsargs addip addtty;" \
- "bootm ${loadaddr} - c00000\0" \
- "load=tftp ${loadaddr} u-boot.bin\0" \
- "update=protect off fc000000 fc03ffff; " \
- "era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0"\
- "upd=run load;run update\0" \
- "fdtaddr=" xstr(CONFIG_SYS_FDT_BASE) "\0" \
- "fdtfile=dtbFile\0" \
- "kernel_addr=" xstr(CONFIG_SYS_OS_BASE) "\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "run flash_mtd"
-
-/*
- * SPL related defines
- */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NOR_SUPPORT
-#define CONFIG_SPL_TEXT_BASE 0xfc000000
-#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx"
-#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-/* Place BSS for SPL near end of SDRAM */
-#define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20)
-#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10)
-
-#define CONFIG_SPL_OS_BOOT
-/* Place patched DT blob (fdt) at this address */
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000
-
-/* Settings for real U-Boot to be loaded from NOR flash */
-#ifndef __ASSEMBLY__
-extern char __spl_flash_end[];
-#endif
-#define CONFIG_SYS_UBOOT_BASE __spl_flash_end
-#define CONFIG_SYS_SPL_MAX_LEN (32 << 10)
-#define CONFIG_SYS_UBOOT_START 0x1000100
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff