powerpc: Migrate HIGH_BATS to Kconfig

[platform/kernel/u-boot.git] / include / configs / TQM834x.h

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 00faa9f..c27a04a 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -16,18 +15,10 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC834x         1       /* MPC834x specific */
-#define CONFIG_MPC8349         1       /* MPC8349 specific */
-#define CONFIG_TQM834X         1       /* TQM834X board specific */
-
-#define        CONFIG_SYS_TEXT_BASE    0x80000000
 
 /* IMMR Base Address Register, use Freescale default: 0xff400000 */
 #define CONFIG_SYS_IMMR                0xff400000
 
-/* System clock. Primary input clock when in PCI host mode */
-#define CONFIG_83XX_CLKIN      66666000        /* 66,666 MHz */
-
 /*
  * Local Bus LCRR
  *    LCRR:  DLL bypass, Clock divider is 8
@@ -43,7 +34,6 @@
 /* board pre init: do not call, nothing to do */
 
 /* detect the number of flash banks */
-#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * DDR Setup
@@ -63,13 +53,10 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #undef CONFIG_SYS_FLASH_CHECKSUM
 #define CONFIG_SYS_FLASH_BASE          0x80000000      /* start of FLASH   */
 #define CONFIG_SYS_FLASH_SIZE          8               /* FLASH size in MB */
 #define CONFIG_SYS_FLASH_EMPTY_INFO    /* print 'E' for empty sectors */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * FLASH bank number detection
@@ -154,7 +141,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -187,8 +173,6 @@
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
-#define CONFIG_MII
 
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
@@ -260,22 +244,12 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
-
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 /*
@@ -286,41 +260,6 @@
                                /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20)
 
-#define CONFIG_SYS_HRCW_LOW (\
-       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-       HRCWL_DDR_TO_SCB_CLK_1X1 |\
-       HRCWL_CSB_TO_CLKIN_4X1 |\
-       HRCWL_VCO_1X2 |\
-       HRCWL_CORE_TO_CSB_2X1)
-
-#if defined(PCI_64BIT)
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_64_BIT_PCI |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_PCI2_ARBITER_DISABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0X00000100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_TSEC1M_IN_GMII |\
-       HRCWH_TSEC2M_IN_GMII)
-#else
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_32_BIT_PCI |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_PCI2_ARBITER_DISABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0X00000100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_TSEC1M_IN_GMII |\
-       HRCWH_TSEC2M_IN_GMII)
-#endif
-
 /* System IO Config */
 #define CONFIG_SYS_SICRH       0
 #define CONFIG_SYS_SICRL       SICRL_LDP_A
@@ -331,8 +270,6 @@
                                 HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2        HID2_HBE
 
-#define CONFIG_HIGH_BATS       1       /* High BATs supported */
-
 /* DDR 0 - 512M */
 #define CONFIG_SYS_IBAT0L      (CONFIG_SYS_SDRAM_BASE \
                                | BATL_PP_RW \
@@ -492,13 +429,6 @@
  * JFFS2 partitions
  */
 /* mtdparts command line support */
-#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT         "nor0=TQM834x-0"
 
 /* default mtd partition table */
-#define MTDPARTS_DEFAULT       "mtdparts=TQM834x-0:256k(u-boot),256k(env)," \
-                                               "1m(kernel),2m(initrd)," \
-                                               "-(user);" \
-
 #endif /* __CONFIG_H */