Kconfig: Move CONFIG_FIT and related options to Kconfig

[platform/kernel/u-boot.git] / include / configs / TQM834x.h

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index fc25425..9ed469a 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -12,11 +12,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC834x         1       /* MPC834x specific */
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_TQM834X         1       /* TQM834X board specific */
@@ -157,7 +158,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -182,7 +182,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2       /* 16 bit */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5       /* 32 bytes/write */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  12      /* 10ms +/- 20% */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS           /* more than one eeprom */
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337                      /* use ds1337 rtc via i2c */
@@ -287,15 +286,12 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
@@ -306,11 +302,6 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -336,11 +327,6 @@
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -495,7 +481,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*