Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

[platform/kernel/u-boot.git] / include / configs / TQM834x.h

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 68e5990..0c6bcae 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -41,7 +41,6 @@
 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
 
 /* board pre init: do not call, nothing to do */
-#undef CONFIG_BOARD_EARLY_INIT_F
 
 /* detect the number of flash banks */
 #define CONFIG_BOARD_EARLY_INIT_R
@@ -185,13 +184,6 @@
 #define CONFIG_RTC_DS1337                      /* use ds1337 rtc via i2c */
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68    /* at address 0x68 */
 
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75                        1       /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS             {0}     /* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP                70
-#define CONFIG_SYS_DTT_LOW_TEMP                -30
-#define CONFIG_SYS_DTT_HYSTERESIS      3
-
 /*
  * TSEC
  */
@@ -221,11 +213,6 @@
 
 #endif /* CONFIG_TSEC_ENET */
 
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-
 #if defined(CONFIG_PCI)
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
@@ -259,7 +246,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_ADDR                \
                        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) for env */
@@ -279,19 +265,6 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /*
- * Command line configuration.
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-/*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
@@ -300,18 +273,6 @@
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
-#endif
-
-                               /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 /*
@@ -477,16 +438,10 @@
                                /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                400000
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE                115200
-
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"
 
-#undef CONFIG_BOOTARGS
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "hostname=tqm834x\0"                                            \
@@ -534,14 +489,8 @@
  * JFFS2 partitions
  */
 /* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT         "nor0=TQM834x-0"
 
 /* default mtd partition table */
-#define MTDPARTS_DEFAULT       "mtdparts=TQM834x-0:256k(u-boot),256k(env)," \
-                                               "1m(kernel),2m(initrd)," \
-                                               "-(user);" \
-
 #endif /* __CONFIG_H */