Convert CONFIG_ENV_OVERWRITE to Kconfig

[platform/kernel/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 50b37ac..a616871 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -1,11 +1,14 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 /*
  * T104x RDB board configuration file
  */
@@ -27,6 +30,7 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_DM_I2C
 #endif
 #define RESET_VECTOR_OFFSET            0x27FFC
 #define BOOT_PAGE_OFFSET               0x27000
@@ -152,8 +156,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
-#define CONFIG_ENV_OVERWRITE
-
 #if defined(CONFIG_SPIFLASH)
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_MMC_ENV_DEV          0
@@ -182,12 +184,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP                64      /* number of TLB1 entries */
-
-#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 /*
  *  Config the L3 Cache as L3 SRAM
  */
@@ -459,8 +455,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 #define CONFIG_SYS_FSL_I2C_SPEED       400000  /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C2_SPEED      400000
 #define CONFIG_SYS_FSL_I2C3_SPEED      400000
@@ -473,7 +469,12 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
 #define CONFIG_SYS_FSL_I2C3_OFFSET     0x119000
 #define CONFIG_SYS_FSL_I2C4_OFFSET     0x119100
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER  0
+#endif
 
+#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
 #define I2C_MUX_CH_DEFAULT      0x8
@@ -484,6 +485,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 /* LDI/DVI Encoder for display */
 #define CONFIG_SYS_I2C_LDI_ADDR                0x38
 #define CONFIG_SYS_I2C_DVI_ADDR                0x75
+#define CONFIG_SYS_I2C_DVI_BUS_NUM     0
 
 /*
  * RTC configuration
@@ -654,11 +656,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
 
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#endif
-
 #ifdef CONFIG_FMAN_ENET
 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03