configs: Migrate CONFIG_USB_STORAGE

[platform/kernel/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 5fc3497..07c511f 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -11,14 +11,20 @@
  * T104x RDB board configuration file
  */
 #define CONFIG_T104xRDB
-#define CONFIG_PHYS_64BIT
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_E500                    /* BOOKE e500 family */
 #include <asm/config_mpc85xx.h>
 
 #ifdef CONFIG_RAMBOOT_PBL
+
+#ifndef CONFIG_SECURE_BOOT
 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_PBI \
+               $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
+#endif
+
 #ifdef CONFIG_T1040RDB
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
 #endif
@@ -62,7 +68,17 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_SUPPORT
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE         (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image.
+ */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((768 << 10) + \
+                                        CONFIG_U_BOOT_HDR_SIZE)
+#else
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
+#endif
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
@@ -130,10 +146,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE2                   /* PCIE controler 2 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
-#define CONFIG_PCIE4                   /* PCIE controler 4 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE2                   /* PCIE controller 2 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
+#define CONFIG_PCIE4                   /* PCIE controller 4 */
 
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -161,6 +177,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (512 * 0x800)
 #elif defined(CONFIG_NAND)
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_BOOTSCRIPT_COPY_RAM
+#endif
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
@@ -202,8 +222,14 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  *  Config the L3 Cache as L3 SRAM
  */
 #define CONFIG_SYS_INIT_L3_ADDR                0xFFFC0000
+/*
+ * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
+ * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
+ * (CONFIG_SYS_INIT_L3_VADDR) will be different.
+ */
+#define CONFIG_SYS_INIT_L3_VADDR       0xFFFC0000
 #define CONFIG_SYS_L3_SIZE             256 << 10
-#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
+#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_ENV_ADDR                        (CONFIG_SPL_GD_ADDR + 4 * 1024)
 #endif
@@ -465,10 +491,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 #endif
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
 /* Video */
 #define CONFIG_FSL_DIU_FB
@@ -487,15 +509,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
@@ -538,7 +551,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  * eSPI - Enhanced SPI
  */
 #define CONFIG_SPI_FLASH_BAR
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 #define CONFIG_ENV_SPI_BUS              0
@@ -620,7 +632,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -632,11 +643,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #endif
 #endif
 
@@ -645,10 +653,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -724,7 +729,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 #endif
 
-
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
@@ -784,13 +788,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_T1042RDB_PI
 #define CONFIG_CMD_DATE
 #endif
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -858,7 +857,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /*-1 disables auto-boot*/
 
 #define CONFIG_BAUDRATE        115200
 
@@ -900,7 +898,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
        "bdev=sda3\0"