rename CFG_ macros to CONFIG_SYS

[platform/kernel/u-boot.git] / include / configs / SMN42.h

diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index 45fe14b..45e6a58 100644 (file)
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -49,8 +49,8 @@
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN         (CONFIG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE      128     /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
@@ -80,13 +80,13 @@
 #undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
 #define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
 /* this would be 0xAE if E0, E1 and E2 were pulled high */
-#define CFG_I2C_SLAVE          0xA0
-#define CFG_I2C_EEPROM_ADDR    (0xA0 >> 1)
-#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
-#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_SYS_I2C_SLAVE           0xA0
+#define CONFIG_SYS_I2C_EEPROM_ADDR     (0xA0 >> 1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
 /* not used but required by devices.c */
-#define CFG_I2C_SPEED 10000
+#define CONFIG_SYS_I2C_SPEED 10000
 
 #ifdef CONFIG_SOFT_I2C
 /*
@@ -129,26 +129,26 @@
 /*
  * Miscellaneous configurable options
  */
-#define        CFG_LONGHELP                            /* undef to save memory         */
-#define        CFG_PROMPT              "SMN42 # " /* Monitor Command Prompt    */
-#define        CFG_CBSIZE              256             /* Console I/O Buffer Size      */
-#define        CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define        CFG_MAXARGS             16              /* max number of command args   */
-#define CFG_BARGSIZE           CFG_CBSIZE      /* Boot Argument Buffer Size    */
+#define        CONFIG_SYS_LONGHELP                             /* undef to save memory         */
+#define        CONFIG_SYS_PROMPT               "SMN42 # " /* Monitor Command Prompt    */
+#define        CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
+#define        CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define        CONFIG_SYS_MAXARGS              16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START      0x81800000      /* memtest works on     */
-#define CFG_MEMTEST_END                0x83000000      /* 24 MB in SRAM        */
+#define CONFIG_SYS_MEMTEST_START       0x81800000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0x83000000      /* 24 MB in SRAM        */
 
-#undef CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#undef CONFIG_SYS_CLKS_IN_HZ           /* everything, incl board info, in Hz */
 
-#define        CFG_LOAD_ADDR           0x81000000      /* default load address */
+#define        CONFIG_SYS_LOAD_ADDR            0x81000000      /* default load address */
                                                /* for uClinux img is here*/
 
-#define CFG_SYS_CLK_FREQ       58982400        /* Hz */
-#define        CFG_HZ                  2048            /* decrementer freq in Hz */
+#define CONFIG_SYS_SYS_CLK_FREQ        58982400        /* Hz */
+#define        CONFIG_SYS_HZ                   2048            /* decrementer freq in Hz */
 
                                                /* valid baudrates */
-#define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -177,23 +177,23 @@
  */
 
 /*
- * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present.
+ * The first entry in CONFIG_SYS_FLASH_BANKS_LIST is a dummy, but it must be present.
  */
-#define CFG_FLASH_BANKS_LIST   { 0, PHYS_FLASH_1 }
-#define CFG_FLASH_ADDR0                        0x555
-#define CFG_FLASH_ADDR1                        0x2AA
-#define CFG_FLASH_ERASE_TOUT   16384   /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT   5       /* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_BANKS_LIST    { 0, PHYS_FLASH_1 }
+#define CONFIG_SYS_FLASH_ADDR0                 0x555
+#define CONFIG_SYS_FLASH_ADDR1                 0x2AA
+#define CONFIG_SYS_FLASH_ERASE_TOUT    16384   /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    5       /* Timeout for Flash Write (in ms) */
 
-#define CFG_MAX_FLASH_SECT     128  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
 
-#define CFG_MAX_FLASH_BANKS    2       /* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of memory banks           */
 
 #define        CONFIG_ENV_IS_IN_FLASH  1
 /* The Environment Sector is in the CPU-internal flash */
-#define CFG_FLASH_BASE         0
+#define CONFIG_SYS_FLASH_BASE          0
 #define CONFIG_ENV_OFFSET              0x3C000
-#define CONFIG_ENV_ADDR                (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #define CONFIG_ENV_SIZE                0x2000 /* Total Size of Environment Sector      */
 
 #define CONFIG_CMDLINE_TAG