Big white-space cleanup.

[platform/kernel/u-boot.git] / include / configs / SCM.h

diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index e263db6..febfc39 100644 (file)
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -63,13 +63,13 @@
 
 #define        CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
 
-#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND                                                     \
-       "bootp; "                                                               \
-       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
-       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
+       "bootp; "                                                               \
+       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
+       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
        "bootm"
 
 /* enable I2C and select the hardware/software driver */
@@ -133,8 +133,7 @@
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  *
  * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
  * X.29 connector, and FCC2 is hardwired to the X.1 connector)
@@ -166,7 +165,7 @@
  * - Enable Full Duplex in FSMR
  */
 # define CFG_CMXFCR_MASK       (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CFG_CMXFCR_VALUE      (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CFG_CMXFCR_VALUE      (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 # define CFG_CPMFCR_RAMTYPE    0
 # define CFG_FCC_PSMR          (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -191,23 +190,33 @@
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
-#define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_BSP)
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_BSP
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
  */
 #define        CFG_LONGHELP                    /* undef to save memory         */
 #define        CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -353,7 +362,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif