#include <asm/config_mpc85xx.h>
#ifdef CONFIG_SDCARD
-#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10)
+#define CFG_SYS_MMC_U_BOOT_SIZE (512 << 10)
+#define CFG_SYS_MMC_U_BOOT_DST (0x11000000)
+#define CFG_SYS_MMC_U_BOOT_START (0x11000000)
+#define CFG_SYS_MMC_U_BOOT_OFFS (96 << 10)
#endif
#ifdef CONFIG_SPIFLASH
#ifdef CONFIG_NXP_ESBC
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
+#define CFG_RESET_VECTOR_ADDRESS 0x110bfffc
#else
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10)
+#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
+#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
+#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
+#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10)
#endif
#endif
#endif
#ifdef CONFIG_NAND_SECBOOT /* NAND Boot */
-#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
+#define CFG_RESET_VECTOR_ADDRESS 0x110bfffc
#endif
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
/* High Level Configuration Options */
#endif
#endif
-#define CONFIG_HWCONFIG
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-
/* DDR Setup */
#define SPD_EEPROM_ADDRESS 0x52
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
#ifndef __ASSEMBLY__
extern unsigned long get_sdram_size(void);
#endif
#define CFG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_CCSRBAR 0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
+#define CFG_SYS_CCSRBAR 0xffe00000
+#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR
/*
* Memory map
*/
/* NOR Flash on IFC */
-#define CONFIG_SYS_FLASH_BASE 0xee000000
+#define CFG_SYS_FLASH_BASE 0xee000000
#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE)
#else
-#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
#endif
-#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \
CSPR_PORT_SIZE_16 | \
CSPR_MSEL_NOR | \
CSPR_V)
FTIM2_NOR_TWP(0x1c)
#define CFG_SYS_NOR_FTIM3 0x0
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS}
/* CFI for NOR Flash */
#define CFG_SYS_NAND_BASE_PHYS CFG_SYS_NAND_BASE
#endif
-#define CONFIG_MTD_PARTITION
-
#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
| CSPR_PORT_SIZE_8 \
| CSPR_MSEL_NAND \
/* Set up IFC registers for boot location NOR/NAND */
#if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT)
-#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1 CFG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3
+#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR
+#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK
+#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR
+#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0
+#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1
+#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2
+#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3
+#define CFG_SYS_CSPR1 CFG_SYS_NOR_CSPR
+#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK
+#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR
+#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0
+#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1
+#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2
+#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3
#else
-#define CONFIG_SYS_CSPR0 CFG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
+#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR
+#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
+#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
+#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
+#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
+#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
+#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
+#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR
+#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK
+#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR
+#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
+#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
+#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
+#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
#endif
/* CPLD on IFC */
-#define CONFIG_SYS_CPLD_BASE 0xffb00000
+#define CFG_SYS_CPLD_BASE 0xffb00000
#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
+#define CFG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
#else
-#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
+#define CFG_SYS_CPLD_BASE_PHYS CFG_SYS_CPLD_BASE
#endif
-#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
+#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \
| CSPR_PORT_SIZE_8 \
| CSPR_MSEL_GPCM \
| CSPR_V)
-#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
-#define CONFIG_SYS_CSOR3 0x0
+#define CFG_SYS_AMASK3 IFC_AMASK(64*1024)
+#define CFG_SYS_CSOR3 0x0
/* CPLD Timing parameters for IFC CS3 */
-#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
FTIM0_GPCM_TEADC(0x0e) | \
FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
+#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
FTIM2_GPCM_TCH(0x8) | \
FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS3_FTIM3 0x0
+#define CFG_SYS_CS3_FTIM3 0x0
-#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
+#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
+#define CFG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Config the L2 Cache as L2 SRAM
*/
#if defined(CONFIG_SPL_BUILD)
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CFG_SYS_INIT_L2_ADDR 0xD0000000
+#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
+#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
#elif defined(CONFIG_MTD_RAW_NAND)
#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CFG_SYS_INIT_L2_ADDR 0xD0000000
+#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
+#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
#else
-#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CFG_SYS_INIT_L2_ADDR 0xD0000000
+#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
+#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
#endif
#endif
#endif
/* Serial Port */
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_SYS_NS16550_CLK get_bus_freq(0)
-#define CONFIG_SYS_BAUDRATE_TABLE \
+#define CFG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x4500)
+#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x4600)
/* I2C */
#define I2C_PCA9557_ADDR1 0x18
/* enable read and write access to EEPROM */
/* RTC */
-#define CONFIG_RTC_PT7C4338
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CFG_SYS_I2C_RTC_ADDR 0x68
/*
* SPI interface will not be available in case of NAND boot SPI CS0 will be
/* eSPI - Enhanced SPI */
#endif
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC2"
-#define CONFIG_TSEC3 1
-#define CONFIG_TSEC3_NAME "eTSEC3"
-
-#define TSEC1_PHY_ADDR 1
-#define TSEC2_PHY_ADDR 0
-#define TSEC3_PHY_ADDR 2
-
-#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC3_PHYIDX 0
-
-/* TBI PHY configuration for SGMII mode */
-#define CONFIG_TSEC_TBICR_SETTINGS ( \
- TBICR_PHY_RESET \
- | TBICR_ANEG_ENABLE \
- | TBICR_FULL_DUPLEX \
- | TBICR_SPEED1_SET \
- )
-
-#endif /* CONFIG_TSEC_ENET */
-
#ifdef CONFIG_MMC
#define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR
#endif
*/
#if defined(CONFIG_MTD_RAW_NAND)
#ifdef CONFIG_TPL_BUILD
-#define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
+#define SPL_ENV_ADDR (CFG_SYS_INIT_L2_ADDR + (160 << 10))
#endif
#endif
* have to be in the first 64 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
+#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
/*
* Environment Configuration
*/
-#define CONFIG_ROOTPATH "/opt/nfsroot"
-#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
"netdev=eth0\0" \
- "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
+ "uboot=" CONFIG_UBOOTPATH "\0" \
"loadaddr=1000000\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
projects / platform / kernel / u-boot.git / blobdiff