Convert CONFIG_MII et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index cbc15ae..70d1295 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -15,10 +14,8 @@
 #define CONFIG_NAND_FSL_IFC
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xD0001000
 #define CONFIG_SPL_PAD_TO              0x18000
 #define CONFIG_SPL_MAX_SIZE            (96 * 1024)
@@ -37,13 +34,11 @@
 #ifdef CONFIG_SPIFLASH
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_TEXT_BASE           0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #else
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SYS_TEXT_BASE                   0x11001000
 #define CONFIG_SPL_TEXT_BASE                   0xD0001000
 #define CONFIG_SPL_PAD_TO                      0x18000
 #define CONFIG_SPL_MAX_SIZE                    (96 * 1024)
@@ -67,7 +62,6 @@
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 
-#define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFFE000
 #define CONFIG_SPL_MAX_SIZE            8192
 #define CONFIG_SPL_RELOC_TEXT_BASE     0x00100000
@@ -104,21 +98,15 @@
 #define CONFIG_SPL_PAD_TO      0x20000
 #define CONFIG_TPL_PAD_TO      0x20000
 #define CONFIG_SPL_TARGET      "u-boot-with-spl.bin"
-#define CONFIG_SYS_TEXT_BASE   0x11001000
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 #endif
 
 #ifdef CONFIG_NAND_SECBOOT     /* NAND Boot */
 #define CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_TEXT_BASE           0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0xeff40000
-#endif
-
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
@@ -191,7 +179,6 @@
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #endif
 
-#define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DDR_CLK_FREQ    66666666 /* DDRCLK on P1010 RDB */
@@ -215,7 +202,6 @@
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x1fffffff
-#define CONFIG_PANIC_HANG              /* do not reset board on panic */
 
 /* DDR Setup */
 #define CONFIG_SYS_DDR_RAW_TIMING
@@ -349,7 +335,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
 #endif
 
-#define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITION
 
 #define CONFIG_SYS_NAND_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
@@ -490,8 +475,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_R
-
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* stack in RAM */
 #define CONFIG_SYS_INIT_RAM_SIZE       0x00004000 /* End of used area in RAM */
@@ -514,7 +497,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #define CONFIG_SPL_RELOC_TEXT_BASE     0xD0001000
 #define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#define CONFIG_SPL_RELOC_STACK_SIZE    (16 << 10)
 #define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE   (128 << 10)
 #define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
@@ -541,7 +523,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX      1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -600,7 +581,6 @@ extern unsigned long get_sdram_size(void);
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
-#define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
@@ -634,9 +614,7 @@ extern unsigned long get_sdram_size(void);
 #endif /* CONFIG_TSEC_ENET */
 
 /* SATA */
-#define CONFIG_FSL_SATA
 #define CONFIG_FSL_SATA_V2
-#define CONFIG_LIBATA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
@@ -651,7 +629,6 @@ extern unsigned long get_sdram_size(void);
 #endif /* #ifdef CONFIG_FSL_SATA  */
 
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
@@ -714,9 +691,6 @@ extern unsigned long get_sdram_size(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*