Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / MigoR.h

diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
deleted file mode 100644 (file)
index 84c364c..0000000
--- a/include/configs/MigoR.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Configuation settings for the Renesas Solutions Migo-R board
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __MIGO_R_H
-#define __MIGO_R_H
-
-#define CONFIG_CPU_SH7722      1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* SMC9111 */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE    (0xB0000000)
-
-/* MEMORY */
-#define MIGO_R_SDRAM_BASE      (0x8C000000)
-#define MIGO_R_FLASH_BASE_1    (0xA0000000)
-#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024)
-
-#define CONFIG_SYS_PBSIZE              256             /* Buffer size for Console output */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }      /* List of legal baudrate settings for this board */
-
-/* SCIF */
-#define CONFIG_CONS_SCIF0      1
-
-#define CONFIG_SYS_MEMTEST_START       (MIGO_R_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
-/* Scratch address used by the alternate memory test */
-#undef  CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE  (MIGO_R_SDRAM_BASE)
-/* maybe more, but if so u-boot doesn't know about it... */
-#define CONFIG_SYS_SDRAM_SIZE  (64 * 1024 * 1024)
-/* default load address for scripts ?!? */
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE        (MIGO_R_FLASH_BASE_1)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN  (256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ   (8 * 1024 * 1024)
-
-/* FLASH */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-/* Physical start address of Flash memory */
-#define CONFIG_SYS_FLASH_BASE  (MIGO_R_FLASH_BASE_1)
-/* Max number of sectors on each Flash chip */
-#define CONFIG_SYS_MAX_FLASH_SECT      512
-
-/* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) }
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT     (3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT   (3 * 1000)
-
-/* Use hardware flash sectors protection instead of U-Boot software protection */
-#undef  CONFIG_SYS_FLASH_PROTECTION
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* ENV setting */
-#define CONFIG_ENV_OVERWRITE   1
-#define CONFIG_ENV_SECT_SIZE   (128 * 1024)
-#define CONFIG_ENV_SIZE                (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET              (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ    33333333
-#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_TMU_CLK_DIV         (4)     /* 4 (default), 16, 64, 256 or 1024 */
-
-#endif /* __MIGO_R_H */