Convert CONFIG_ENV_OVERWRITE to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC8568MDS.h

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 6d9a964..2c43981 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2004-2007, 2010-2011 Freescale Semiconductor.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -17,11 +16,7 @@
 #define CONFIG_PCIE1           1       /* PCIE controller */
 #define CONFIG_FSL_PCI_INIT    1       /* use common fsl pci init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
-#define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
-#define CONFIG_QE                      /* Enable QE */
-#define CONFIG_ENV_OVERWRITE
 
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
@@ -39,14 +34,10 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 #define CONFIG_SYS_CCSRBAR             0xe0000000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER      /* DDR controller or DMA? */
@@ -67,8 +58,6 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required")
 #endif
 
-#undef CONFIG_CLOCKS_IN_MHZ
-
 /*
  * Local Bus Definitions
  */
@@ -123,8 +112,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /*
@@ -207,7 +194,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MALLOC_LEN          (512 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -301,8 +287,6 @@ extern unsigned long get_clock_freq(void);
 #endif /* CONFIG_QE */
 
 #if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
@@ -311,7 +295,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define CONFIG_TSEC2   1
@@ -334,9 +317,6 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env */
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
@@ -379,7 +359,7 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_IPADDR    192.168.1.253
 
-#define CONFIG_HOSTNAME  unknown
+#define CONFIG_HOSTNAME  "unknown"
 #define CONFIG_ROOTPATH  "/nfsroot"
 #define CONFIG_BOOTFILE  "your.uImage"