Convert CONFIG_SYS_LOAD_ADDR to Kconfig
[platform/kernel/u-boot.git] / include / configs / MPC8540ADS.h
index 0f96ac0..a9edf09 100644 (file)
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2004, 2011 Freescale Semiconductor.
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -22,7 +21,6 @@
  * default CCARBAR is at 0xff700000
  * assume U-Boot is less than 0.5MB
  */
-#define        CONFIG_SYS_TEXT_BASE    0xfff80000
 
 #ifndef CONFIG_HAS_FEC
 #define CONFIG_HAS_FEC         1       /* 8540 has FEC */
@@ -30,8 +28,6 @@
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
 
 /*
  * sysclk for MPC85xx
 #define CONFIG_L2_CACHE                        /* toggle L2 cache */
 #define CONFIG_BTB                     /* toggle branch predition */
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest region */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 #define CONFIG_SYS_CCSRBAR             0xe0000000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_SPD
-#undef CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_MEM_INIT_VALUE          0xDeadBeef
 
 #undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#undef CONFIG_CLOCKS_IN_MHZ
-
 /*
  * Local Bus Definitions
  */
 #define CONFIG_SYS_MALLOC_LEN          (128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX     1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       400000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
 #define CONFIG_SYS_I2C_NOPROBES                { {0, 0x69} }
 
 /* RapidIO MMU */
 #define CONFIG_SYS_PCI1_IO_SIZE        0x100000        /* 1M */
 
 #if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
     #define PCI_ENET0_IOADDR   0xe0000000
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
 #define CONFIG_TSEC2   1
 /*
  * Environment
  */
-#ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_IS_IN_FLASH       1
-  #define CONFIG_ENV_ADDR              (CONFIG_SYS_MONITOR_BASE + 0x40000)
-  #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
-  #define CONFIG_ENV_SIZE              0x2000
-#else
-  #define CONFIG_ENV_IS_NOWHERE        1       /* Store ENV in memory only */
-  #define CONFIG_ENV_ADDR              (CONFIG_SYS_MONITOR_BASE - 0x1000)
-  #define CONFIG_ENV_SIZE              0x2000
-#endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-
-#if defined(CONFIG_CMD_KGDB)
-    #define CONFIG_SYS_CBSIZE  1024            /* Console I/O Buffer Size */
-#else
-    #define CONFIG_SYS_CBSIZE  256             /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
 
 #define CONFIG_IPADDR    192.168.1.253
 
-#define CONFIG_HOSTNAME                unknown
+#define CONFIG_HOSTNAME                "unknown"
 #define CONFIG_ROOTPATH                "/nfsroot"
 #define CONFIG_BOOTFILE                "your.uImage"
 
 #define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK   255.255.255.0
 
-#define CONFIG_LOADADDR  200000        /* default location for tftp and bootm */
-
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \
    "fdtaddr=400000\0"                                                  \
    "fdtfile=your.fdt.dtb\0"
 
-#define CONFIG_NFSBOOTCOMMAND                                          \
+#define NFSBOOTCOMMAND                                         \
    "setenv bootargs root=/dev/nfs rw "                                  \
       "nfsroot=$serverip:$rootpath "                                    \
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
    "tftp $fdtaddr $fdtfile;"                                           \
    "bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_RAMBOOTCOMMAND \
+#define RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $fdtaddr $fdtfile;"                                           \
    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND  NFSBOOTCOMMAND
 
 #endif /* __CONFIG_H */