SPDX: Convert all of our single license tags to Linux Kernel style

[platform/kernel/u-boot.git] / include / configs / MPC8540ADS.h

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index af3e85e..6fdab33 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2004, 2011 Freescale Semiconductor.
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -18,17 +17,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-#define CONFIG_BOOKE           1       /* BOOKE */
-#define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC8540         1       /* MPC8540 specific */
-#define CONFIG_MPC8540ADS      1       /* MPC8540ADS board specific */
-
 /*
  * default CCARBAR is at 0xff700000
  * assume U-Boot is less than 0.5MB
  */
-#define        CONFIG_SYS_TEXT_BASE    0xfff80000
 
 #ifndef CONFIG_HAS_FEC
 #define CONFIG_HAS_FEC         1       /* 8540 has FEC */
@@ -36,9 +28,7 @@
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 /*
  * sysclk for MPC85xx
@@ -75,7 +65,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR1
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -85,7 +74,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000      /* DDR is system memory*/
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -214,7 +202,6 @@
 #define CONFIG_SYS_MALLOC_LEN          (128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX     1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -300,13 +287,10 @@
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_IS_IN_FLASH       1
   #define CONFIG_ENV_ADDR              (CONFIG_SYS_MONITOR_BASE + 0x40000)
   #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
   #define CONFIG_ENV_SIZE              0x2000
 #else
-  #define CONFIG_SYS_NO_FLASH          1       /* Flash is not usable now */
-  #define CONFIG_ENV_IS_NOWHERE        1       /* Store ENV in memory only */
   #define CONFIG_ENV_ADDR              (CONFIG_SYS_MONITOR_BASE - 0x1000)
   #define CONFIG_ENV_SIZE              0x2000
 #endif
@@ -318,39 +302,18 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_IRQ
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-    #define CONFIG_SYS_CBSIZE  1024            /* Console I/O Buffer Size */
-#else
-    #define CONFIG_SYS_CBSIZE  256             /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is
@@ -376,7 +339,7 @@
 
 #define CONFIG_IPADDR    192.168.1.253
 
-#define CONFIG_HOSTNAME                unknown
+#define CONFIG_HOSTNAME                "unknown"
 #define CONFIG_ROOTPATH                "/nfsroot"
 #define CONFIG_BOOTFILE                "your.uImage"
 
@@ -386,10 +349,6 @@
 
 #define CONFIG_LOADADDR  200000        /* default location for tftp and bootm */
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE        115200
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \