ata: Migrate CONFIG_LIBATA to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC8536DS.h

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index aeb9f0b..7587225 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -286,7 +286,6 @@
                                CONFIG_SYS_NAND_BASE + 0x80000, \
                                CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE     4
-#define CONFIG_CMD_NAND                1
 #define CONFIG_NAND_FSL_ELBC   1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
@@ -509,9 +508,6 @@
 #endif /* CONFIG_PCI */
 
 /* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1               CONFIG_SYS_MPC85xx_SATA1_ADDR
@@ -522,7 +518,6 @@
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
@@ -548,8 +543,6 @@
 
 #define CONFIG_ETHPRIME                "eTSEC1"
 
-#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-
 #endif /* CONFIG_TSEC_ENET */
 
 /*
@@ -558,7 +551,6 @@
 
 #if defined(CONFIG_SYS_RAMBOOT)
 #if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS     0
 #define CONFIG_ENV_SPI_CS      0
 #define CONFIG_ENV_SPI_MAX_HZ  10000000
@@ -567,17 +559,14 @@
 #define CONFIG_ENV_OFFSET      0xF0000
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #elif defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_SYS_MMC_ENV_DEV  0
 #else
-       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
 #else
-       #define CONFIG_ENV_IS_IN_FLASH  1
        #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
        #define CONFIG_ENV_SIZE         0x2000
        #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
@@ -586,17 +575,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 #ifdef CONFIG_MMC
@@ -609,9 +587,7 @@
  */
 #define CONFIG_HAS_FSL_MPH_USB
 #ifdef CONFIG_HAS_FSL_MPH_USB
-#define CONFIG_USB_EHCI
-
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #endif
@@ -624,15 +600,6 @@
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE \
-               + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -672,8 +639,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
 "netdev=eth0\0"                                                \
 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                    \