ata: Migrate CONFIG_LIBATA to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC837XERDB.h

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index e77848e..656180f 100644 (file)
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -15,13 +15,9 @@
 #define CONFIG_E300            1 /* E300 family */
 #define CONFIG_MPC837x         1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XERDB     1
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0xFE000000
 
-#define CONFIG_PCI     1
-
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_HWCONFIG
 
@@ -225,7 +221,7 @@
 #undef CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -344,14 +340,6 @@
 #define CONFIG_FSL_SERDES1     0xe3000
 #define CONFIG_FSL_SERDES2     0xe3100
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -406,7 +394,6 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
@@ -447,9 +434,6 @@
 /*
  * SATA
  */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1_OFFSET        0x18000
@@ -462,23 +446,17 @@
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_IS_IN_FLASH  1
        #define CONFIG_ENV_ADDR         \
                        (CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
        #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K (one sector) for env */
        #define CONFIG_ENV_SIZE         0x4000
 #else
-       #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
-       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
@@ -494,35 +472,19 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -531,24 +493,13 @@
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000 /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256 /* Console I/O Buffer Size */
-#endif
-
-                               /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -678,9 +629,6 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
@@ -696,8 +644,6 @@
 
                                /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                800000
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
-#define CONFIG_BAUDRATE                115200
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" CONFIG_NETDEV "\0"                            \