powerpc: Migrate HIGH_BATS to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC8349ITX.h

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index e2807a6..e7031e9 100644 (file)
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) Freescale Semiconductor, Inc. 2006.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -40,30 +39,18 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)
-#define CONFIG_SYS_LOWBOOT
-#endif
-
 /*
  * High Level Configuration Options
  */
-#define CONFIG_MPC834x         /* MPC834x family (8343, 8347, 8349) */
-#define CONFIG_MPC8349         /* MPC8349 specific */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xFEF00000
-#endif
-
 #define CONFIG_SYS_IMMR        0xE0000000      /* The IMMR is relocated to here */
 
 #define CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
 
 /*
  * On-board devices
  */
 
-#ifdef CONFIG_MPC8349ITX
+#ifdef CONFIG_TARGET_MPC8349ITX
 /* The CF card interface on the back of the board */
 #define CONFIG_COMPACT_FLASH
 #define CONFIG_VSC7385_ENET    /* VSC7385 ethernet support */
@@ -72,7 +59,6 @@
 
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C
-#define CONFIG_TSEC_ENET               /* TSEC Ethernet support */
 
 /*
  * Device configurations
@@ -193,8 +179,6 @@
  *Flash on the Local Bus
  */
 
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #define CONFIG_SYS_FLASH_BASE          0xFE000000      /* start of FLASH   */
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 /* 127 64KB sectors + 8 8KB sectors per device */
@@ -210,7 +194,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_FLASH_BANKS_LIST    \
                {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
 #define CONFIG_SYS_FLASH_SIZE          16      /* FLASH size in MB */
-#define CONFIG_SYS_FLASH_PROTECTION    1       /* Use h/w Flash protection. */
 
 /* Vitesse 7385 */
 
@@ -344,7 +327,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -405,19 +387,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #endif
 
-#define CONFIG_PCI_66M
-#ifdef CONFIG_PCI_66M
-#define CONFIG_83XX_CLKIN      66666666        /* in Hz */
-#else
-#define CONFIG_83XX_CLKIN      33333333        /* in Hz */
-#endif
-
 /* TSEC */
 
 #ifdef CONFIG_TSEC_ENET
-
-#define CONFIG_MII
-
 #define CONFIG_TSEC1
 
 #ifdef CONFIG_TSEC1
@@ -454,7 +426,6 @@ boards, we say we have two, but don't display a message if we find only one. */
   #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
   #define CONFIG_ENV_SIZE      0x2000
 #else
-  #undef  CONFIG_FLASH_CFI_DRIVER
   #define CONFIG_ENV_ADDR      (CONFIG_SYS_MONITOR_BASE - 0x1000)
   #define CONFIG_ENV_SIZE      0x2000
 #endif
@@ -466,9 +437,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Watchdog */
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
@@ -476,9 +444,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
@@ -492,41 +457,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20)
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-#define CONFIG_SYS_HRCW_LOW (\
-       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-       HRCWL_DDR_TO_SCB_CLK_1X1 |\
-       HRCWL_CSB_TO_CLKIN_4X1 |\
-       HRCWL_VCO_1X2 |\
-       HRCWL_CORE_TO_CSB_2X1)
-
-#ifdef CONFIG_SYS_LOWBOOT
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_32_BIT_PCI |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_PCI2_ARBITER_ENABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0X00000100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_TSEC1M_IN_GMII |\
-       HRCWH_TSEC2M_IN_GMII)
-#else
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_32_BIT_PCI |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_PCI2_ARBITER_ENABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0XFFF00100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_TSEC1M_IN_GMII |\
-       HRCWH_TSEC2M_IN_GMII)
-#endif
-
 /*
  * System performance
  */
@@ -551,7 +481,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_HID0_FINAL  HID0_ENABLE_INSTRUCTION_CACHE
 
 #define CONFIG_SYS_HID2        HID2_HBE
-#define CONFIG_HIGH_BATS       1       /* High BATs supported */
 
 /* DDR  */
 #define CONFIG_SYS_IBAT0L      (CONFIG_SYS_SDRAM_BASE \
@@ -666,7 +595,7 @@ boards, we say we have two, but don't display a message if we find only one. */
                                /* U-Boot image on TFTP server */
 #define CONFIG_UBOOTPATH       "u-boot.bin"
 
-#ifdef CONFIG_MPC8349ITX
+#ifdef CONFIG_TARGET_MPC8349ITX
 #define CONFIG_FDTFILE         "mpc8349emitx.dtb"
 #else
 #define CONFIG_FDTFILE         "mpc8349emitxgp.dtb"