include/configs: remove CONFIG_SYS_CBSIZE when the default value is used
[platform/kernel/u-boot.git] / include / configs / MPC8323ERDB.h
index c4c771b..a3d760f 100644 (file)
  */
 #define CONFIG_E300            1       /* E300 family */
 #define CONFIG_QE              1       /* Has QE */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC832x         1       /* MPC832x CPU specific */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFE000000
 
-#define CONFIG_PCI             1
-
 /*
  * System Clock Setup
  */
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024)    /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)    /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (256 * 1024)    /* Reserved for malloc */
 
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
 #define CONFIG_SYS_I2C
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_IS_IN_FLASH  1
        #define CONFIG_ENV_ADDR         \
                        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
        #define CONFIG_ENV_SECT_SIZE    0x20000
        #define CONFIG_ENV_SIZE         0x2000
 #else
-       #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
-       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ASKENV
-
-#if defined(CONFIG_PCI)
-       #define CONFIG_CMD_PCI
-#endif
-#if defined(CONFIG_SYS_RAMBOOT)
-       #undef CONFIG_CMD_SAVEENV
-       #undef CONFIG_CMD_LOADS
-#endif
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
-#if (CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
-#endif
-
                                /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
  */
                                        /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ           (256 << 20)
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
 
                                /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                800000
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
-#define CONFIG_BAUDRATE                115200
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" CONFIG_NETDEV "\0"                                    \