Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / include / configs / M5275EVB.h

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 38e785c..5e6d085 100644 (file)
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Motorola MC5275EVB board.
  *
@@ -6,8 +7,6 @@
  *
  * Based off of M5272C3 board code by Josef Baumgartner
  * <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -22,81 +21,33 @@
  * (easy to change)
  */
 
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_OFFSET              0x4000
-#define CONFIG_ENV_SECT_SIZE   0x2000
-#else
-#define CONFIG_ENV_ADDR                0xffe04000
-#define CONFIG_ENV_SECT_SIZE   0x2000
-#endif
 
 #define LDS_BOARD_TEXT \
        . = DEFINED(env_offset) ? env_offset : .; \
        env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
 /* Available command configuration */
 
-#define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_MII             1
-#define CONFIG_MII_INIT                1
 #define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_RX_ETH_BUFFER       8
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FEC0_PINMUX         0
-#define CONFIG_SYS_FEC0_MIIBASE        CONFIG_SYS_FEC0_IOBASE
-#define CONFIG_SYS_FEC1_PINMUX         0
-#define CONFIG_SYS_FEC1_MIIBASE        CONFIG_SYS_FEC1_IOBASE
-#define MCFFEC_TOUT_LOOP       50000
-#define CONFIG_HAS_ETH1
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #ifndef CONFIG_SYS_DISCOVER_PHY
 #define FECDUPLEX              FULL
 #define FECSPEED               _100BASET
-#else
-#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#endif
 #endif
 #endif
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       80000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x00000300
-#define CONFIG_SYS_IMMR                CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG      (gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR      (0xFFF0)
 #define CONFIG_SYS_I2C_PINMUX_SET      (0x000F)
 
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-
-#define CONFIG_SYS_LOAD_ADDR           0x800000
-
-#define CONFIG_BOOTCOMMAND     "bootm ffe40000"
-#define CONFIG_SYS_MEMTEST_START       0x400
-#define CONFIG_SYS_MEMTEST_END         0x380000
-
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_RETRY_COUNT   5
 #      define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif                         /* FEC_ENET */
 
@@ -127,8 +78,6 @@
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -139,15 +88,7 @@
 #define CONFIG_SYS_SDRAM_SIZE          16      /* SDRAM size in MB */
 #define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_CS0_BASE
 
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE        0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN         0x20000
-#define CONFIG_SYS_MALLOC_LEN          (256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN      64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -160,18 +101,14 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      11      /* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    1000
 
-#define CONFIG_SYS_FLASH_CFI           1
-#define CONFIG_FLASH_CFI_DRIVER        1
 #define CONFIG_SYS_FLASH_SIZE          0x200000
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
                                         CONFIG_SYS_INIT_RAM_SIZE - 8)