+++ /dev/null
-/*
- * (C) Copyright 2004 Sandburst Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************
- * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference
- * design.
- ***********************************************************************/
-
-/*
- * $Id: KAREF.h,v 1.6 2005/06/03 15:05:25 tsawyer Exp $
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */
-#define CONFIG_440GX 1 /* Specifc GX support */
-#define CONFIG_440 1 /* ... PPC440 family */
-#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */
-#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */
-#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/
-#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
-
-#define CONFIG_VERY_BIG_RAM 1
-#define CONFIG_VERSION_VARIABLE
-
-#define CONFIG_IDENT_STRING " Sandburst Kamino Reference Design"
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */
-#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
-#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
-#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
-#define CONFIG_SYS_KAREF_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000)
-#define CONFIG_SYS_OFEM_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08400000)
-#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000)
-#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
-
-/* Here for completeness */
-#define CONFIG_SYS_OFEMAC_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08600000)
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SERIAL_MULTI 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/
-#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/
-#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C 1 /* I2C hardware support */
-#undef CONFIG_SOFT_I2C /* I2C !bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
-#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
-#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */
-
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */
-
-#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR)
-
-#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*-----------------------------------------------------------------------
- * Networking
- *----------------------------------------------------------------------*/
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1
-#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
-#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
-#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */
-#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_HAS_ETH3
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */
-#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */
-#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */
-#define CONFIG_PHY_RESET_DELAY 1000
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */
-#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */
-#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-
-
-/* Include NetConsole support */
-#define CONFIG_NETCONSOLE
-
-/* Include auto complete with tabs */
-#define CONFIG_AUTO_COMPLETE 1
-#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "KaRefDes=> " /* Monitor Command Prompt */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-
-/*-----------------------------------------------------------------------
- * Console Buffer
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
- /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
-
-/*-----------------------------------------------------------------------
- * Memory Test
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/*-----------------------------------------------------------------------
- * Compact Flash (in true IDE mode)
- *----------------------------------------------------------------------*/
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */
-
-#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride
- to get to the correct offset */
-#define CONFIG_DOS_PARTITION 1 /* Include dos partition */
-
-/*-----------------------------------------------------------------------
- * PCI
- *----------------------------------------------------------------------*/
-/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices */
-#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE)
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */
-#define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */
-#endif
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */
-
-#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */
-
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff