include/configs: drop default definitions of CONFIG_SYS_MAXARGS

[platform/kernel/u-boot.git] / include / configs / BSC9131RDB.h

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 282366c..62a9a13 100644 (file)
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -181,7 +181,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
 #define CONFIG_SYS_NAND_DDR_LAW                11
@@ -228,7 +227,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
 
 /* I2C EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
@@ -260,15 +258,12 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_ETHPRIME                "eTSEC1"
 
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
-
 #endif /* CONFIG_TSEC_ENET */
 
 /*
  * Environment
  */
 #if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS     0
 #define CONFIG_ENV_SPI_CS      0
 #define CONFIG_ENV_SPI_MAX_HZ  10000000
@@ -277,13 +272,11 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #define CONFIG_ENV_SIZE                0x2000
 #elif defined(CONFIG_NAND)
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET      ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_IS_NOWHERE  /* Store ENV in memory only */
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
 #define CONFIG_ENV_SIZE                0x2000
 #endif
@@ -292,13 +285,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_LOADS_BAUD_CHANGE           /* allow baudrate change */
 
 /*
- * Command line configuration.
- */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-/*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
@@ -311,9 +297,6 @@ extern unsigned long get_sdram_size(void);
 #else
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-                                               /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
@@ -328,15 +311,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #endif
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
-#define CONFIG_USB_EHCI
-
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_HAS_FSL_DR_USB
@@ -347,7 +322,6 @@ extern unsigned long get_sdram_size(void);
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT "nand0=ff800000.flash,"
 #define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
                        "8m(kernel),512k(dtb),-(fs)"
@@ -365,8 +339,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin" /* U-Boot image on TFTP server */
 
-#define CONFIG_BAUDRATE                115200
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "netdev=eth0\0"                                         \
        "uboot=" CONFIG_UBOOTPATH "\0"                          \