env: Finish migration of common ENV options

[platform/kernel/u-boot.git] / include / configs / B4860QDS.h

diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 723d18e..d213375 100644 (file)
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -17,8 +17,6 @@
 #define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
 #else
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
 #define RESET_VECTOR_OFFSET            0x27FFC
@@ -27,8 +25,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-#define CONFIG_SPL_NAND_BOOT
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
@@ -99,40 +95,9 @@
 
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef CONFIG_MTD_NOR_FLASH
-#else
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#endif
-
 #if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_SPI_BUS              0
-#define CONFIG_ENV_SPI_CS               0
-#define CONFIG_ENV_SPI_MAX_HZ           10000000
-#define CONFIG_ENV_SPI_MODE             0
-#define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
-#define CONFIG_ENV_SECT_SIZE            0x10000
 #elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_SYS_MMC_ENV_DEV          0
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (512 * 1097)
-#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-#define CONFIG_ENV_ADDR                0xffe20000
-#define CONFIG_ENV_SIZE                0x2000
-#elif defined(CONFIG_ENV_IS_NOWHERE)
-#define CONFIG_ENV_SIZE                0x2000
-#else
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
 
 #ifndef __ASSEMBLY__
@@ -172,9 +137,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_INIT_L3_ADDR                0xFFFC0000
 #define CONFIG_SYS_L3_SIZE             256 << 10
 #define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
-#ifdef CONFIG_NAND
-#define CONFIG_ENV_ADDR                        (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#endif
+#define SPL_ENV_ADDR                   (CONFIG_SPL_GD_ADDR + 4 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SPL_GD_ADDR + 12 * 1024)
 #define CONFIG_SPL_RELOC_MALLOC_SIZE   (30 << 10)
 #define CONFIG_SPL_RELOC_STACK         (CONFIG_SPL_GD_ADDR + 64 * 1024)
@@ -205,9 +168,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_DDR_RAW_TIMING
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_FSL_DDR_INTERACTIVE
-#endif
 
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define SPD_EEPROM_ADDRESS1    0x51
@@ -287,7 +247,7 @@ unsigned long get_board_ddr_clk(void);
                                | CSPR_PORT_SIZE_8 \
                                | CSPR_MSEL_GPCM \
                                | CSPR_V)
-#define CONFIG_SYS_AMASK3      IFC_AMASK(4 * 1024)
+#define CONFIG_SYS_AMASK3      IFC_AMASK(64 * 1024)
 #define CONFIG_SYS_CSOR3       0x0
 /* QIXIS Timing parameters for IFC CS3 */
 #define CONFIG_SYS_CS3_FTIM0           (FTIM0_GPCM_TACSE(0x0e) | \
@@ -403,8 +363,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_HWCONFIG
 
 /* define to use L1 as initial stack */
@@ -522,8 +480,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SF_DEFAULT_SPEED         10000000
-#define CONFIG_SF_DEFAULT_MODE          0
 
 /*
  * MAPLE
@@ -603,7 +559,6 @@ unsigned long get_board_ddr_clk(void);
  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
  * env, so we got 0x110000.
  */
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #elif defined(CONFIG_SDCARD)
 /*
@@ -611,10 +566,8 @@ unsigned long get_board_ddr_clk(void);
  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR        (512 * 1130)
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_FMAN_FW_ADDR        (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
@@ -624,10 +577,8 @@ unsigned long get_board_ddr_clk(void);
  * slave SRIO or PCIE outbound window->master inbound window->
  * master LAW->the ucode address in master's memory space.
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 #define CONFIG_SYS_FMAN_FW_ADDR        0xFFE00000
 #else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
@@ -635,7 +586,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
 #define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_TERANETICS
@@ -664,7 +614,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 
-#define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC1"
 #endif