+// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
*/
#include <common.h>
#include <asm/io.h>
#include <usb.h>
#include "ehci.h"
+#include <linux/mbus.h>
#include <asm/arch/cpu.h>
+#include <dm.h>
#if defined(CONFIG_KIRKWOOD)
-#include <asm/arch/kirkwood.h>
+#include <asm/arch/soc.h>
#elif defined(CONFIG_ORION5X)
#include <asm/arch/orion5x.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
-#define rdl(off) readl(MVUSB0_BASE + (off))
-#define wrl(off, val) writel((val), MVUSB0_BASE + (off))
-
#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
#define USB_TARGET_DRAM 0x0
+#define USB2_SBUSCFG_OFF 0x90
+
+#define USB_SBUSCFG_BAWR_OFF 0x6
+#define USB_SBUSCFG_BARD_OFF 0x3
+#define USB_SBUSCFG_AHBBRST_OFF 0x0
+
+#define USB_SBUSCFG_BAWR_ALIGN_64B 0x4
+#define USB_SBUSCFG_BARD_ALIGN_64B 0x4
+#define USB_SBUSCFG_AHBBRST_INCR16 0x7
+
/*
* USB 2.0 Bridge Address Decoding registers setup
*/
-static void usb_brg_adrdec_setup(void)
+#ifdef CONFIG_DM_USB
+
+struct ehci_mvebu_priv {
+ struct ehci_ctrl ehci;
+ fdt_addr_t hcd_base;
+};
+
+/*
+ * Once all the older Marvell SoC's (Orion, Kirkwood) are converted
+ * to the common mvebu archticture including the mbus setup, this
+ * will be the only function needed to configure the access windows
+ */
+static void usb_brg_adrdec_setup(void *base)
+{
+ const struct mbus_dram_target_info *dram;
+ int i;
+
+ dram = mvebu_mbus_dram_info();
+
+ for (i = 0; i < 4; i++) {
+ writel(0, base + USB_WINDOW_CTRL(i));
+ writel(0, base + USB_WINDOW_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ /* Write size, attributes and target id to control register */
+ writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ base + USB_WINDOW_CTRL(i));
+
+ /* Write base address to base register */
+ writel(cs->base, base + USB_WINDOW_BASE(i));
+ }
+}
+
+static void marvell_ehci_powerup_fixup(struct ehci_ctrl *ctrl,
+ uint32_t *status_reg, uint32_t *reg)
+{
+ struct ehci_mvebu_priv *priv = ctrl->priv;
+
+ /*
+ * Set default value for reg SBUSCFG, which is Control for the AMBA
+ * system bus interface:
+ * BAWR = BARD = 4 : Align rd/wr bursts packets larger than 64 bytes
+ * AHBBRST = 7 : Align AHB burst for packets larger than 64 bytes
+ */
+ writel((USB_SBUSCFG_BAWR_ALIGN_64B << USB_SBUSCFG_BAWR_OFF) |
+ (USB_SBUSCFG_BARD_ALIGN_64B << USB_SBUSCFG_BARD_OFF) |
+ (USB_SBUSCFG_AHBBRST_INCR16 << USB_SBUSCFG_AHBBRST_OFF),
+ priv->hcd_base + USB2_SBUSCFG_OFF);
+
+ mdelay(50);
+}
+
+static struct ehci_ops marvell_ehci_ops = {
+ .powerup_fixup = NULL,
+};
+
+static int ehci_mvebu_probe(struct udevice *dev)
+{
+ struct ehci_mvebu_priv *priv = dev_get_priv(dev);
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+
+ /*
+ * Get the base address for EHCI controller from the device node
+ */
+ priv->hcd_base = devfdt_get_addr(dev);
+ if (priv->hcd_base == FDT_ADDR_T_NONE) {
+ debug("Can't get the EHCI register base address\n");
+ return -ENXIO;
+ }
+
+ /*
+ * For SoCs without hlock like Armada3700 we need to program the sbuscfg
+ * reg to guarantee AHB master's burst will not overrun or underrun
+ * the FIFO. Otherwise all USB2 write option will fail.
+ * Also, the address decoder doesn't need to get setup with this
+ * SoC, so don't call usb_brg_adrdec_setup().
+ */
+ if (device_is_compatible(dev, "marvell,armada3700-ehci"))
+ marvell_ehci_ops.powerup_fixup = marvell_ehci_powerup_fixup;
+ else
+ usb_brg_adrdec_setup((void *)priv->hcd_base);
+
+ hccr = (struct ehci_hccr *)(priv->hcd_base + 0x100);
+ hcor = (struct ehci_hcor *)
+ ((uintptr_t)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ debug("ehci-marvell: init hccr %lx and hcor %lx hc_length %ld\n",
+ (uintptr_t)hccr, (uintptr_t)hcor,
+ (uintptr_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ return ehci_register(dev, hccr, hcor, &marvell_ehci_ops, 0,
+ USB_INIT_HOST);
+}
+
+static const struct udevice_id ehci_usb_ids[] = {
+ { .compatible = "marvell,orion-ehci", },
+ { .compatible = "marvell,armada3700-ehci", },
+ { }
+};
+
+U_BOOT_DRIVER(ehci_mvebu) = {
+ .name = "ehci_mvebu",
+ .id = UCLASS_USB,
+ .of_match = ehci_usb_ids,
+ .probe = ehci_mvebu_probe,
+ .remove = ehci_deregister,
+ .ops = &ehci_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct ehci_mvebu_priv),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+
+#else
+#define MVUSB_BASE(port) MVUSB0_BASE
+
+static void usb_brg_adrdec_setup(int index)
{
int i;
u32 size, base, attrib;
size = gd->bd->bi_dram[i].size;
base = gd->bd->bi_dram[i].start;
if ((size) && (attrib))
- wrl(USB_WINDOW_CTRL(i),
- MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
- attrib, MVCPU_WIN_ENABLE));
+ writel(MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
+ attrib, MVCPU_WIN_ENABLE),
+ MVUSB0_BASE + USB_WINDOW_CTRL(i));
else
- wrl(USB_WINDOW_CTRL(i), MVCPU_WIN_DISABLE);
+ writel(MVCPU_WIN_DISABLE,
+ MVUSB0_BASE + USB_WINDOW_CTRL(i));
- wrl(USB_WINDOW_BASE(i), base);
+ writel(base, MVUSB0_BASE + USB_WINDOW_BASE(i));
}
}
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
- usb_brg_adrdec_setup();
+ usb_brg_adrdec_setup(index);
- *hccr = (struct ehci_hccr *)(MVUSB0_BASE + 0x100);
+ *hccr = (struct ehci_hccr *)(MVUSB_BASE(index) + 0x100);
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
{
return 0;
}
+
+#endif /* CONFIG_DM_USB */
projects / platform / kernel / u-boot.git / blobdiff