Support USB2/3 functionality in simple SoC integrations with
USB controller based on the DesignWare USB3 IP Core.
+config USB_XHCI_EXYNOS
+ bool "Support for Samsung Exynos5 family on-chip xHCI USB controller"
+ depends on ARCH_EXYNOS5
+ default y
+ help
+ Enables support for he on-chip xHCI controller on Samsung Exynos5
+ SoCs.
+
config USB_XHCI_MTK
bool "Support for MediaTek on-chip xHCI USB controller"
- depends on ARCH_MEDIATEK
+ depends on ARCH_MEDIATEK || SOC_MT7621
help
Enables support for the on-chip xHCI controller on MediaTek SoCs.
endif # USB_XHCI_HCD
+config EHCI_DESC_BIG_ENDIAN
+ bool
+
+config EHCI_MMIO_BIG_ENDIAN
+ bool
+
config USB_EHCI_HCD
bool "EHCI HCD (USB 2.0) support"
default y if ARCH_MX5 || ARCH_MX6
depends on DM && OF_CONTROL
select USB_HOST
+ select EHCI_DESC_BIG_ENDIAN if SYS_BIG_ENDIAN
+ select EHCI_MMIO_BIG_ENDIAN if SYS_BIG_ENDIAN
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
if USB_EHCI_HCD
+config USB_EHCI_IS_TDI
+ bool
+
config USB_EHCI_ATMEL
bool "Support for Atmel on-chip EHCI USB controller"
depends on ARCH_AT91
---help---
Enables support for the on-chip EHCI controller on Atmel chips.
+config USB_EHCI_EXYNOS
+ bool "Support for Samsung Exynos EHCI USB controller"
+ depends on ARCH_EXYNOS
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on Samsung Exynos
+ SoCs.
+
config USB_EHCI_MARVELL
bool "Support for Marvell on-chip EHCI USB controller"
depends on ARCH_MVEBU || ARCH_KIRKWOOD || ARCH_ORION5X
default y
+ select USB_EHCI_IS_TDI if !ARM64
---help---
Enables support for the on-chip EHCI controller on MVEBU SoCs.
config USB_EHCI_MX6
bool "Support for i.MX6/i.MX7ULP on-chip EHCI USB controller"
depends on ARCH_MX6 || ARCH_MX7ULP || ARCH_IMXRT
+ select EHCI_HCD_INIT_AFTER_RESET
default y
---help---
Enables support for the on-chip EHCI controller on i.MX6 SoCs.
config USB_EHCI_MX7
bool "Support for i.MX7 on-chip EHCI USB controller"
depends on ARCH_MX7 || IMX8M
+ select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7
select PHY if IMX8M
select NOP_PHY if IMX8M
default y
Enables support for the on-chip EHCI controller on i.MX7 SoCs.
config USB_EHCI_MXS
- bool "Support for i.MX23 EHCI USB controller"
- depends on ARCH_MX23
+ bool "Support for i.MX23/i.MX28 EHCI USB controller"
+ depends on ARCH_MX23 || ARCH_MX28
default y
+ select USB_EHCI_IS_TDI
help
- Enables support for the on-chip EHCI controller on i.MX23 SoCs.
+ Enables support for the on-chip EHCI controller on i.MX23 and
+ i.MX28 SoCs.
config USB_EHCI_OMAP
bool "Support for OMAP3+ on-chip EHCI USB controller"
depends on ARCH_OMAP2PLUS
+ select PHY
+ imply NOP_PHY
default y
---help---
Enables support for the on-chip EHCI controller on OMAP3 and later
SoCs.
-if USB_EHCI_OMAP
-
-config HAS_OMAP_EHCI_PHY1_RESET_GPIO
- bool "PHY #1 requires a GPIO hold to it in RESET while PHY settles"
- help
- Enable this to be able to configure the GPIO number used to hold the
- PHY in RESET for enough time until the PHY is settled and ready.
-
-config OMAP_EHCI_PHY1_RESET_GPIO
- int "GPIO number to hold PHY #1 in RESET"
- depends on HAS_OMAP_EHCI_PHY1_RESET_GPIO
-
-config HAS_OMAP_EHCI_PHY2_RESET_GPIO
- bool "PHY #2 requires a GPIO hold to it in RESET while PHY settles"
- help
- Enable this to be able to configure the GPIO number used to hold the
- PHY in RESET for enough time until the PHY is settled and ready.
-
-config OMAP_EHCI_PHY2_RESET_GPIO
- int "GPIO number to hold PHY #2 in RESET"
- depends on HAS_OMAP_EHCI_PHY2_RESET_GPIO
-
-config HAS_OMAP_EHCI_PHY3_RESET_GPIO
- bool "PHY #3 requires a GPIO hold to it in RESET while PHY settles"
- help
- Enable this to be able to configure the GPIO number used to hold the
- PHY in RESET for enough time until the PHY is settled and ready.
-
-config OMAP_EHCI_PHY3_RESET_GPIO
- int "GPIO number to hold PHY #3 in RESET"
- depends on HAS_OMAP_EHCI_PHY3_RESET_GPIO
-
-endif
-
config USB_EHCI_VF
bool "Support for Vybrid on-chip EHCI USB controller"
depends on ARCH_VF610
config USB_EHCI_TEGRA
bool "Support for NVIDIA Tegra on-chip EHCI USB controller"
depends on ARCH_TEGRA
+ select USB_EHCI_IS_TDI
---help---
Enable support for Tegra on-chip EHCI USB controller
config USB_EHCI_ZYNQ
bool "Support for Xilinx Zynq on-chip EHCI USB controller"
default y if ARCH_ZYNQ
+ select USB_EHCI_IS_TDI
---help---
Enable support for Zynq on-chip EHCI USB controller
---help---
Enables support for generic EHCI controller.
+config EHCI_HCD_INIT_AFTER_RESET
+ bool
+
config USB_EHCI_FSL
bool "Support for FSL on-chip EHCI USB controller"
- select CONFIG_EHCI_HCD_INIT_AFTER_RESET
+ select EHCI_HCD_INIT_AFTER_RESET
+ select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85xx && \
+ !(ARCH_B4860 || ARCH_B4420 || ARCH_P4080 || ARCH_P1020 || ARCH_P2020)
---help---
Enables support for the on-chip EHCI controller on FSL chips.
+
+config SYS_FSL_USB_INTERNAL_UTMI_PHY
+ bool
+ depends on USB_EHCI_FSL
+
+config USB_EHCI_TXFIFO_THRESH
+ hex
+ depends on USB_EHCI_TEGRA
+ default 0x10
+ help
+ This parameter affects a TXFILLTUNING field that controls how much
+ data is sent to the latency fifo before it is sent to the wire.
+ Without this parameter, the default (2) causes occasional Data Buffer
+ Errors in OUT packets depending on the buffer address and size.
+
endif # USB_EHCI_HCD
+config USB_OHCI_NEW
+ bool
+
+config SYS_USB_OHCI_CPU_INIT
+ bool
+
config USB_OHCI_HCD
bool "OHCI HCD (USB 1.1) support"
depends on DM && OF_CONTROL
select USB_HOST
+ select USB_OHCI_NEW
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
endif # USB_OHCI_HCD
+config SYS_USB_OHCI_SLOT_NAME
+ string "Display name for the OHCI controller"
+ depends on USB_OHCI_NEW && !DM_USB
+
+config SYS_USB_OHCI_MAX_ROOT_PORTS
+ int "Maximal number of ports of the root hub"
+ depends on USB_OHCI_NEW
+ default 1 if ARCH_SUNXI
+
+config SYS_OHCI_SWAP_REG_ACCESS
+ bool "Perform byte swapping on OHCI controller register accesses"
+ depends on USB_OHCI_NEW
+
config USB_UHCI_HCD
bool "UHCI HCD (most Intel and VIA) support"
select USB_HOST
---help---
This enables support for the on-chip Renesas R8A66597 USB 2.0
controller, present in various RZ and SH SoCs.
+
+config USB_ATMEL
+ bool "AT91 OHCI USB support"
+ depends on ARCH_AT91
+ select SYS_USB_OHCI_CPU_INIT
+ select USB_OHCI_NEW
+
+choice
+ prompt "Clock for OHCI"
+ depends on USB_ATMEL
+
+config USB_ATMEL_CLK_SEL_PLLB
+ bool "PLLB"
+
+config USB_ATMEL_CLK_SEL_UPLL
+ bool "UPLL"
+
+endchoice
+
+config USB_OHCI_LPC32XX
+ bool "LPC32xx USB OHCI support"
+ depends on ARCH_LPC32XX
+ select SYS_USB_OHCI_CPU_INIT
+ select USB_OHCI_NEW
+
+config USB_MAX_CONTROLLER_COUNT
+ int "Maximum number of USB host controllers"
+ depends on USB_EHCI_FSL || USB_XHCI_FSL || \
+ (SPL_USB_HOST && !DM_SPL_USB) || (USB_HOST && !DM_USB)
+ default 1
projects / platform / kernel / u-boot.git / blobdiff