rename CFG_ macros to CONFIG_SYS

[platform/kernel/u-boot.git] / drivers / i2c / tsi108_i2c.c

diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 695e393..fda822c 100644 (file)
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -60,14 +60,14 @@ static int i2c_read_byte (
                chan_offset = TSI108_I2C_SDRAM_OFFSET;
 
        /* Check if I2C operation is in progress */
-       temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+       temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
 
        if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
                          I2C_CNTRL2_START))) {
                /* Set device address and operation (read = 0) */
                temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
                    ((chip_addr >> 3) & 0x0F);
-               *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+               *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
                    temp;
 
                /* Issue the read command
@@ -75,13 +75,13 @@ static int i2c_read_byte (
                 * (size = 1 byte, lane = 0)
                 */
 
-               *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+               *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
                    (I2C_CNTRL2_START);
 
                /* Wait until operation completed */
                do {
                        /* Read I2C operation status */
-                       temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+                       temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
 
                        if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
                                if (0 == (temp &
@@ -90,7 +90,7 @@ static int i2c_read_byte (
                                    ) {
                                        op_status = TSI108_I2C_SUCCESS;
 
-                                       temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+                                       temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
                                                         chan_offset +
                                                         I2C_RD_DATA);
 
@@ -172,25 +172,25 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
        u32 op_status = TSI108_I2C_TIMEOUT_ERR;
 
        /* Check if I2C operation is in progress */
-       temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+       temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
 
        if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
                /* Place data into the I2C Tx Register */
-               *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+               *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
                          I2C_TX_DATA) = (u32) * buffer;
 
                /* Set device address and operation  */
                temp =
                    I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
                    ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
-               *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+               *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
                          I2C_CNTRL1) = temp;
 
                /* Issue the write command (at this moment all other parameters
                 * are 0 (size = 1 byte, lane = 0)
                 */
 
-               *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+               *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
                          I2C_CNTRL2) = (I2C_CNTRL2_START);
 
                op_status = TSI108_I2C_TIMEOUT_ERR;
@@ -198,7 +198,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
                /* Wait until operation completed */
                do {
                        /* Read I2C operation status */
-                       temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+                       temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
 
                        if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
                                if (0 == (temp &