env: Finish migration of common ENV options

[platform/kernel/u-boot.git] / configs / sama5d3_xplained_nandflash_defconfig

diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index 884e0a2..b7e8dd9 100644 (file)
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D3_XPLAINED=y
@@ -8,14 +9,14 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_DEBUG_UART=y
+CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -25,7 +26,6 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(boots
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMI is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
@@ -38,11 +38,16 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -55,7 +60,10 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
+CONFIG_PMECC_CAP=4
+CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
@@ -72,4 +80,9 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
 CONFIG_FAT_WRITE=y
+CONFIG_OF_LIBFDT_OVERLAY=y