Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / configs / netspace_max_v2_defconfig

diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig
index a3b2d0a..3c84731 100644 (file)
--- a/configs/netspace_max_v2_defconfig
+++ b/configs/netspace_max_v2_defconfig
@@ -1,27 +1,39 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_KIRKWOOD=y
+CONFIG_SYS_KWD_CONFIG="board/LaCie/netspace_v2/kwbimage.cfg"
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_TARGET_NETSPACE_V2=y
+CONFIG_NETSPACE_MAX_V2=y
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_IDENT_STRING=" NS Max v2"
 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2max"
+CONFIG_IDENT_STRING=" NS Max v2"
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_ENV_ADDR=0x70000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000
 # CONFIG_SYS_MALLOC_F is not set
-CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="dhcp && run netconsole; if run usbload || run diskload; then bootm; fi"
 CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
+CONFIG_SYS_MAXARGS=32
+CONFIG_SYS_PBSIZE=1046
 CONFIG_CMD_EEPROM=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
 CONFIG_CMD_I2C=y
 CONFIG_CMD_SATA=y
 CONFIG_CMD_USB=y
@@ -37,13 +49,17 @@ CONFIG_EFI_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=20000000
-CONFIG_ENV_ADDR=0x70000
 CONFIG_NETCONSOLE=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
 CONFIG_DM=y
 CONFIG_SATA_MV=y
-CONFIG_BLK=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
+CONFIG_KIRKWOOD_GPIO=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x0
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 # CONFIG_MMC is not set
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -55,6 +71,5 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y