Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

[platform/kernel/u-boot.git] / configs / lx2160ardb_tfa_SECURE_BOOT_defconfig

diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 0551ef0..4232ade 100644 (file)
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -1,18 +1,21 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LX2160ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
 CONFIG_NXP_ESBC=y
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
+CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_EMC2305=y
 CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_FIT_VERBOSE=y
@@ -20,11 +23,13 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
-# CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -37,16 +42,18 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
@@ -56,22 +63,21 @@ CONFIG_SYS_CORTINA_NO_FW_UPLOAD=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_E1000=y
+CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y
 CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_PCF2127=y
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
+CONFIG_PL01X_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_NXP_FSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y