Merge branch '2022-07-07-Kconfig-migrations-dead-code-removal' into next

[platform/kernel/u-boot.git] / configs / ls2080aqds_sdcard_defconfig

diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig
index d790965..e972842 100644 (file)
--- a/configs/ls2080aqds_sdcard_defconfig
+++ b/configs/ls2080aqds_sdcard_defconfig
@@ -1,8 +1,10 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SYS_TEXT_BASE=0x80400000
 CONFIG_SYS_MALLOC_LEN=0x0220000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=3
@@ -10,14 +12,16 @@ CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
 CONFIG_SPL_TEXT_BASE=0x1800a000
-CONFIG_FSL_USE_PCA9547_MUX=y
-CONFIG_FSL_QIXIS=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_FSL_QIXIS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
@@ -30,11 +34,21 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="mmc read 0x80200000 0x6800 0x800; fsl_mc apply dpl 0x80200000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 CONFIG_RESET_PHY_R=y
+CONFIG_SPL_MAX_SIZE=0x16000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x18009ff0
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
@@ -64,6 +78,7 @@ CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EARLY_INIT=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
+CONFIG_ESDHC_DETECT_QUIRK=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y