Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / configs / ls2080aqds_sdcard_defconfig

diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig
index d866966..23c2020 100644 (file)
--- a/configs/ls2080aqds_sdcard_defconfig
+++ b/configs/ls2080aqds_sdcard_defconfig
@@ -1,35 +1,50 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SYS_TEXT_BASE=0x80400000
+CONFIG_SYS_MALLOC_LEN=0x0220000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x300000
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
 CONFIG_SPL_TEXT_BASE=0x1800a000
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_FSL_QIXIS=y
 CONFIG_FSL_LS_PPA=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
 CONFIG_AHCI=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="mmc read 0x80200000 0x6800 0x800; fsl_mc apply dpl 0x80200000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
+CONFIG_RESET_PHY_R=y
+CONFIG_SPL_MAX_SIZE=0x16000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -38,21 +53,32 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_DATE=y
-CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
-CONFIG_DM_MMC=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DIMM_SLOTS_PER_CTLR=2
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_EARLY_INIT=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHYLIB=y
 CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
@@ -61,18 +87,16 @@ CONFIG_PHY_VITESSE=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y