Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / configs / ls1043ardb_sdcard_defconfig

diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 05cb940..94e7b96 100644 (file)
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_LEN=0x102000
@@ -20,9 +21,12 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT"
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg"
@@ -31,7 +35,11 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x17000
+CONFIG_SPL_PAD_TO=0x1d000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
@@ -39,6 +47,8 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_SPL=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -50,15 +60,17 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -67,12 +79,16 @@ CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SF_DEFAULT_BUS=1
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_REALTEK=y
@@ -82,7 +98,7 @@ CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_SYS_FMAN_FW_ADDR=0x900000
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_SYS_QE_FW_ADDR=0x940000