Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / configs / gose_defconfig

diff --git a/configs/gose_defconfig b/configs/gose_defconfig
index b51cb4a..9099f5d 100644 (file)
--- a/configs/gose_defconfig
+++ b/configs/gose_defconfig
@@ -5,14 +5,14 @@ CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_RMOBILE=y
 CONFIG_SYS_TEXT_BASE=0x50000000
+CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="r8a7793-gose-u-boot"
 CONFIG_SPL_TEXT_BASE=0xe6300000
@@ -25,8 +25,13 @@ CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_ENV_ADDR=0xC0000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
+CONFIG_SPL_MAX_SIZE=0x4000
+CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_RAM_SUPPORT=y
@@ -35,6 +40,8 @@ CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=256
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_XIMG is not set
@@ -60,7 +67,6 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:256k(u-boot-spl),512k(u-boot-env1),512k
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0xC0000
 CONFIG_VERSION_VARIABLE=y
 CONFIG_CLK=y
 CONFIG_CLK_RENESAS=y
@@ -74,6 +80,7 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_BITBANGMII=y
+CONFIG_BITBANGMII_MULTI=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ8XXX=y
 CONFIG_DM_ETH=y