Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

[platform/kernel/u-boot.git] / configs / at91sam9xeek_dataflash_cs0_defconfig

diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig
index e0abfb3..1e41ea4 100644 (file)
--- a/configs/at91sam9xeek_dataflash_cs0_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs0_defconfig
@@ -1,21 +1,28 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x21f00000
-CONFIG_TARGET_AT91SAM9260EK=y
+CONFIG_SYS_MALLOC_LEN=0x2d000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_AT91SAM9260EK=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4200
 CONFIG_ENV_OFFSET=0x4200
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SECT_SIZE=0x210
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
@@ -23,28 +30,25 @@ CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=15000000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
-CONFIG_NAND=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y
@@ -52,7 +56,6 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
@@ -60,4 +63,3 @@ CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y