Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / configs / at91sam9n12ek_spiflash_defconfig

diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig
index be8ef51..3ac22ff 100644 (file)
--- a/configs/at91sam9n12ek_spiflash_defconfig
+++ b/configs/at91sam9n12ek_spiflash_defconfig
@@ -1,58 +1,65 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_AT91SAM9N12EK=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x3000
 CONFIG_ENV_OFFSET=0x5000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x303f00
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_MAX_SIZE=0x6000
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs)"
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
-CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_KS8851_MLL=y
+CONFIG_KS8851_MLL_BASEADDR=0x30000000
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
@@ -60,6 +67,4 @@ CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_ATMEL_HLCD=y