Convert CONFIG_SYS_MONITOR_LEN to Kconfig

[platform/kernel/u-boot.git] / configs / T1042D4RDB_SDCARD_defconfig

diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig
index a2751ce..5a6f9a8 100644 (file)
--- a/configs/T1042D4RDB_SDCARD_defconfig
+++ b/configs/T1042D4RDB_SDCARD_defconfig
@@ -1,5 +1,5 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
+CONFIG_TEXT_BASE=0x30000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
@@ -11,7 +11,18 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
+CONFIG_SYS_INIT_RAM_LOCK=y
 CONFIG_TARGET_T1042D4RDB=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_BOOK3E_HV=y
+CONFIG_SYS_CACHE_STASHING=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_PCIE4=y
+CONFIG_SYS_FSL_NUM_CC_PLLS=2
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -25,19 +36,33 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x28000
+CONFIG_SPL_PAD_TO=0x40000
 CONFIG_SPL_MMC_BOOT=y
 CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_GD_ADDR=0xfffc8000
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
@@ -54,9 +79,7 @@ CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="FM1@DTSEC4"
-CONFIG_DM=y
 CONFIG_FSL_CAAM=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_CHIP_SELECTS_PER_CTRL=2
 CONFIG_DDR_ECC=y
@@ -77,8 +100,11 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=10000000
@@ -86,7 +112,6 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_VITESSE=y
-CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
@@ -104,6 +129,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64