Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

[platform/kernel/u-boot.git] / configs / P1020RDB-PC_36BIT_SDCARD_defconfig

diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
index c24a57f..4611751 100644 (file)
--- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig
@@ -1,13 +1,14 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
 CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
@@ -19,6 +20,8 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_MISC_INIT_R is not set
@@ -26,10 +29,12 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_MMC_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
 CONFIG_CMD_IMLS=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
@@ -44,7 +49,15 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x3000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
+CONFIG_SYS_I2C_EEPROM_ADDR=0x52
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -52,7 +65,6 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y