Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig

[platform/kernel/u-boot.git] / configs / P1010RDB-PB_36BIT_SPIFLASH_defconfig

diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
index 32c428a..2d646f9 100644 (file)
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
@@ -1,5 +1,6 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
@@ -7,11 +8,11 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pb_36b"
 CONFIG_SPL_TEXT_BASE=0xD0001000
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PB=y
 CONFIG_PHYS_64BIT=y
@@ -21,16 +22,21 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_ID_EEPROM=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_SPI_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
@@ -45,8 +51,17 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
+CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x3000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -54,7 +69,6 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y
@@ -79,4 +93,5 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y
 CONFIG_ADDR_MAP=y