Use correct spelling of "U-Boot"

[platform/kernel/u-boot.git] / board / tqc / tqma6 / tqma6.c

diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
index 69c4551..7fc57da 100644 (file)
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@@ -17,6 +17,7 @@
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/spi.h>
 #include <common.h>
 #include <fsl_esdhc.h>
 #include <libfdt.h>
@@ -24,6 +25,7 @@
 #include <mmc.h>
 #include <power/pfuze100_pmic.h>
 #include <power/pmic.h>
+#include <spi_flash.h>
 
 #include "tqma6_bb.h"
 
@@ -50,7 +52,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-       gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+       gd->ram_size = imx_ddr_size();
 
        return 0;
 }
@@ -75,7 +77,7 @@ static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
 
 /*
  * According to board_mmc_init() the following map is done:
- * (U-boot device node)    (Physical Port)
+ * (U-Boot device node)    (Physical Port)
  * mmc0                    eMMC (SD3) on TQMa6
  * mmc1 .. n               optional slots used on baseboard
  */
@@ -138,11 +140,13 @@ static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
        NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
 };
 
+#define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19)
+
 static unsigned const tqma6_ecspi1_cs[] = {
-       IMX_GPIO_NR(3, 19),
+       TQMA6_SF_CS_GPIO,
 };
 
-static void tqma6_iomuxc_spi(void)
+__weak void tqma6_iomuxc_spi(void)
 {
        unsigned i;
 
@@ -152,6 +156,12 @@ static void tqma6_iomuxc_spi(void)
                                         ARRAY_SIZE(tqma6_ecspi1_pads));
 }
 
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+       return ((bus == CONFIG_SF_DEFAULT_BUS) &&
+               (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1;
+}
+
 static struct i2c_pads_info tqma6_i2c3_pads = {
        /* I2C3: on board LM75, M24C64,  */
        .scl = {
@@ -172,8 +182,14 @@ static struct i2c_pads_info tqma6_i2c3_pads = {
 
 static void tqma6_setup_i2c(void)
 {
-       /* use logical index for bus, e.g. I2C1 -> 0 */
-       setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
+       int ret;
+       /*
+        * use logical index for bus, e.g. I2C1 -> 0
+        * warn on error
+        */
+       ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
+       if (ret)
+               printf("setup I2C3 failed: %d\n", ret);
 }
 
 int board_early_init_f(void)
@@ -229,10 +245,10 @@ int board_late_init(void)
         * fixed in generic power code
         */
        power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
-       p = pmic_get("PFUZE100_PMIC");
+       p = pmic_get("PFUZE100");
        if (p && !pmic_probe(p)) {
                pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
-               printf("PMIC: PFUZE100_PMIC ID=0x%02x\n", reg);
+               printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
        }
 
        tqma6_bb_board_late_init();
@@ -251,12 +267,14 @@ int checkboard(void)
  * Device Tree Support
  */
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        /* bring in eMMC dsr settings */
        do_fixup_by_path_u32(blob,
                             "/soc/aips-bus@02100000/usdhc@02198000",
                             "dsr", tqma6_emmc_dsr, 2);
        tqma6_bb_ft_board_setup(blob, bd);
+
+       return 0;
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */