rename CFG_ macros to CONFIG_SYS

[platform/kernel/u-boot.git] / board / tqc / tqm834x / tqm834x.c

diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
index 278780d..106cac2 100644 (file)
--- a/board/tqc/tqm834x/tqm834x.c
+++ b/board/tqc/tqm834x/tqm834x.c
@@ -67,7 +67,7 @@ static void set_cs_config(short cs, long config);
 static void set_ddr_config(void);
 
 /* Local variable */
-static volatile immap_t *im = (immap_t *)CFG_IMMR;
+static volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 /**************************************************************************
  * Board initialzation after relocation to RAM. Used to detect the number
@@ -92,13 +92,13 @@ phys_size_t initdram (int board_type)
        int cs;
 
        /* during size detection, set up the max DDRLAW size */
-       im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE;
+       im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE;
        im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);
 
        /* set CS bounds to maximum size */
        for(cs = 0; cs < 4; ++cs) {
                set_cs_bounds(cs,
-                       CFG_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
+                       CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
                        DDR_MAX_SIZE_PER_CS);
 
                set_cs_config(cs, INITIAL_CS_CONFIG);
@@ -122,7 +122,7 @@ phys_size_t initdram (int board_type)
                debug("\nDetecting Bank%d\n", cs);
 
                bank_size = get_ddr_bank_size(cs,
-                       (volatile long*)(CFG_DDR_BASE + size));
+                       (volatile long*)(CONFIG_SYS_DDR_BASE + size));
                size += bank_size;
 
                debug("DDR Bank%d size: %d MiB\n\n", cs, bank_size >> 20);
@@ -145,7 +145,7 @@ int checkboard (void)
        volatile immap_t * immr;
        u32 w, f;
 
-       immr = (immap_t *)CFG_IMMR;
+       immr = (immap_t *)CONFIG_SYS_IMMR;
        if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
                printf("PCI:   NOT in host mode..?!\n");
                return 0;
@@ -193,9 +193,9 @@ static int detect_num_flash_banks(void)
        tqm834x_num_flash_banks = 2;    /* assume two banks */
 
        /* Get bank 1 and 2 information */
-       bank1_size = flash_get_size(CFG_FLASH_BASE, 0);
+       bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0);
        debug("Bank1 size: %lu\n", bank1_size);
-       bank2_size = flash_get_size(CFG_FLASH_BASE + bank1_size, 1);
+       bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1);
        debug("Bank2 size: %lu\n", bank2_size);
        total_size = bank1_size + bank2_size;
 
@@ -203,8 +203,8 @@ static int detect_num_flash_banks(void)
                /* Seems like we've got bank 2, but maybe it's mirrored 1 */
 
                /* Set the base addresses */
-               bank1_base = (FPWV *) (CFG_FLASH_BASE);
-               bank2_base = (FPWV *) (CFG_FLASH_BASE + bank1_size);
+               bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
+               bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size);
 
                /* Put bank 2 into CFI command mode and read */
                bank2_base[0x55] = 0x00980098;
@@ -253,9 +253,9 @@ static int detect_num_flash_banks(void)
        debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks);
 
        /* set OR0 and BR0 */
-       im->lbus.bank[0].or = CFG_OR_TIMING_FLASH |
+       im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH |
                (-(total_size) & OR_GPCM_AM);
-       im->lbus.bank[0].br = (CFG_FLASH_BASE & BR_BA) |
+       im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) |
                (BR_MS_GPCM | BR_PS_32 | BR_V);
 
        return (0);