+// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
* (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
* Tom Cubie <tangliang@allwinnertech.com>
*
* Some board init for the Allwinner A10-evb board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#endif
#include <asm/gpio.h>
#include <asm/io.h>
+#include <crc.h>
#include <environment.h>
-#include <libfdt.h>
+#include <linux/libfdt.h>
#include <nand.h>
#include <net.h>
+#include <spl.h>
#include <sy8106a.h>
+#include <asm/setup.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
DECLARE_GLOBAL_DATA_PTR;
+void i2c_init_board(void)
+{
+#ifdef CONFIG_I2C0_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN5I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
+ clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
+ clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
+ clock_twi_onoff(0, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C1_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
+ clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
+ clock_twi_onoff(1, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C2_ENABLE
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
+ clock_twi_onoff(2, 1);
+#elif defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
+ clock_twi_onoff(2, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C3_ENABLE
+#if defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
+ clock_twi_onoff(3, 1);
+#elif defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
+ clock_twi_onoff(3, 1);
+#endif
+#endif
+
+#ifdef CONFIG_I2C4_ENABLE
+#if defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
+ sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
+ clock_twi_onoff(4, 1);
+#endif
+#endif
+
+#ifdef CONFIG_R_I2C_ENABLE
+ clock_twi_onoff(5, 1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
+#endif
+}
+
+#if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT)
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+ switch (prio) {
+ case 0:
+ return ENVL_FAT;
+
+ case 1:
+ return ENVL_MMC;
+
+ default:
+ return ENVL_UNKNOWN;
+ }
+}
+#endif
+
/* add board specific code here */
int board_init(void)
{
- __maybe_unused int id_pfr1, ret;
+ __maybe_unused int id_pfr1, ret, satapwr_pin, macpwr_pin;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
* we avoid the risk of writing to it.
*/
asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq));
- if (freq != CONFIG_TIMER_CLK_FREQ) {
+ if (freq != COUNTER_FREQUENCY) {
debug("arch timer frequency is %d Hz, should be %d, fixing ...\n",
- freq, CONFIG_TIMER_CLK_FREQ);
+ freq, COUNTER_FREQUENCY);
#ifdef CONFIG_NON_SECURE
printf("arch timer frequency is wrong, but cannot adjust it\n");
#else
asm volatile("mcr p15, 0, %0, c14, c0, 0"
- : : "r"(CONFIG_TIMER_CLK_FREQ));
+ : : "r"(COUNTER_FREQUENCY));
#endif
}
}
return ret;
#ifdef CONFIG_SATAPWR
- gpio_request(CONFIG_SATAPWR, "satapwr");
- gpio_direction_output(CONFIG_SATAPWR, 1);
+ satapwr_pin = sunxi_name_to_gpio(CONFIG_SATAPWR);
+ gpio_request(satapwr_pin, "satapwr");
+ gpio_direction_output(satapwr_pin, 1);
+ /* Give attached sata device time to power-up to avoid link timeouts */
+ mdelay(500);
#endif
#ifdef CONFIG_MACPWR
- gpio_request(CONFIG_MACPWR, "macpwr");
- gpio_direction_output(CONFIG_MACPWR, 1);
+ macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR);
+ gpio_request(macpwr_pin, "macpwr");
+ gpio_direction_output(macpwr_pin, 1);
+#endif
+
+#ifdef CONFIG_DM_I2C
+ /*
+ * Temporary workaround for enabling I2C clocks until proper sunxi DM
+ * clk, reset and pinctrl drivers land.
+ */
+ i2c_init_board();
#endif
/* Uses dm gpio code so do this here and not in i2c_init_board() */
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
setbits_le32(&ccm->ahb_gate0, (CLK_GATE_OPEN << AHB_GATE_OFFSET_NAND0));
-#ifdef CONFIG_MACH_SUN9I
- setbits_le32(&ccm->ahb_gate1, (1 << AHB_GATE_OFFSET_DMA));
-#else
- setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_DMA));
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I || \
+ defined CONFIG_MACH_SUN9I || defined CONFIG_MACH_SUN50I
+ setbits_le32(&ccm->ahb_reset0_cfg, (1 << AHB_GATE_OFFSET_NAND0));
#endif
setbits_le32(&ccm->nand0_clk_cfg, CCM_NAND_CTRL_ENABLE | AHB_DIV_1);
}
}
#endif
-#ifdef CONFIG_GENERIC_MMC
+#ifdef CONFIG_MMC
static void mmc_pinmux_setup(int sdc)
{
unsigned int pin;
case 1:
pins = sunxi_name_to_gpio_bank(CONFIG_MMC1_PINS);
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
if (pins == SUNXI_GPIO_H) {
/* SDC1: PH22-PH-27 */
for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) {
sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
}
+#elif defined(CONFIG_MACH_SUN8I_R40)
+ /* SDC2: PC6-PC15, PC24 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(15); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
#elif defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN50I)
/* SDC2: PC5-PC6, PC8-PC16 */
for (pin = SUNXI_GPC(5); pin <= SUNXI_GPC(6); pin++) {
sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(pin, 2);
}
+#elif defined(CONFIG_MACH_SUN9I)
+ /* SDC2: PC6-PC16 */
+ for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(16); pin++) {
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
+ sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_drv(pin, 2);
+ }
#endif
break;
case 3:
pins = sunxi_name_to_gpio_bank(CONFIG_MMC3_PINS);
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
/* SDC3: PI4-PI9 */
for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) {
sunxi_gpio_set_cfgpin(pin, SUNXI_GPI_SDC3);
return -1;
#endif
-#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
- /*
- * On systems with an emmc (mmc2), figure out if we are booting from
- * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc.
- * are searched there first. Note we only do this for u-boot proper,
- * not for the SPL, see spl_boot_device().
- */
- if (readb(SPL_ADDR + 0x28) == SUNXI_BOOTED_FROM_MMC2) {
- /* Booting from emmc / mmc2, swap */
- mmc0->block_dev.devnum = 1;
- mmc1->block_dev.devnum = 0;
- }
-#endif
-
return 0;
}
#endif
-void i2c_init_board(void)
-{
-#ifdef CONFIG_I2C0_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
- clock_twi_onoff(0, 1);
-#elif defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
- clock_twi_onoff(0, 1);
-#elif defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
- clock_twi_onoff(0, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C1_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
- clock_twi_onoff(1, 1);
-#elif defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(15), SUN5I_GPB_TWI1);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(16), SUN5I_GPB_TWI1);
- clock_twi_onoff(1, 1);
-#elif defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
- clock_twi_onoff(1, 1);
-#elif defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
- clock_twi_onoff(1, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C2_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
- clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(17), SUN5I_GPB_TWI2);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN5I_GPB_TWI2);
- clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
- clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
- sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
- clock_twi_onoff(2, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C3_ENABLE
-#if defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
- sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
- clock_twi_onoff(3, 1);
-#elif defined(CONFIG_MACH_SUN7I)
- sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
- sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
- clock_twi_onoff(3, 1);
-#endif
-#endif
-
-#ifdef CONFIG_I2C4_ENABLE
-#if defined(CONFIG_MACH_SUN7I)
- sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
- sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
- clock_twi_onoff(4, 1);
-#endif
-#endif
-
-#ifdef CONFIG_R_I2C_ENABLE
- clock_twi_onoff(5, 1);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
-#endif
-}
-
#ifdef CONFIG_SPL_BUILD
void sunxi_board_init(void)
{
int power_failed = 0;
- unsigned long ramsize;
#ifdef CONFIG_SY8106A_POWER
power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
#endif
#endif
printf("DRAM:");
- ramsize = sunxi_dram_init();
- printf(" %d MiB\n", (int)(ramsize >> 20));
- if (!ramsize)
+ gd->ram_size = sunxi_dram_init();
+ printf(" %d MiB\n", (int)(gd->ram_size >> 20));
+ if (!gd->ram_size)
hang();
/*
char *serial_string;
unsigned long long serial;
- serial_string = getenv("serial#");
+ serial_string = env_get("serial#");
if (serial_string) {
serial = simple_strtoull(serial_string, NULL, 16);
* data is expected in uEnv.txt compatible format, so "env
* import -t" the string(s) at fel_script_address right away.
*/
- himport_r(&env_htab, (char *)spl->fel_script_address,
+ himport_r(&env_htab, (char *)(uintptr_t)spl->fel_script_address,
spl->fel_uEnv_length, '\n', H_NOCLEAR, 0, 0, NULL);
return;
}
/* otherwise assume .scr format (mkimage-type script) */
- setenv_hex("fel_scriptaddr", spl->fel_script_address);
+ env_set_hex("fel_scriptaddr", spl->fel_script_address);
}
/*
int i, ret;
ret = sunxi_get_sid(sid);
- if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
+ if (ret == 0 && sid[0] != 0) {
+ /*
+ * The single words 1 - 3 of the SID have quite a few bits
+ * which are the same on many models, so we take a crc32
+ * of all 3 words, to get a more unique value.
+ *
+ * Note we only do this on newer SoCs as we cannot change
+ * the algorithm on older SoCs since those have been using
+ * fixed mac-addresses based on only using word 3 for a
+ * long time and changing a fixed mac-address with an
+ * u-boot update is not good.
+ */
+#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
+ !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
+ !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
+ sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
+#endif
+
+ /* Ensure the NIC specific bytes of the mac are not all 0 */
+ if ((sid[3] & 0xffffff) == 0)
+ sid[3] |= 0x800000;
+
for (i = 0; i < 4; i++) {
sprintf(ethaddr, "ethernet%d", i);
if (!fdt_get_alias(fdt, ethaddr))
else
sprintf(ethaddr, "eth%daddr", i);
- if (getenv(ethaddr))
+ if (env_get(ethaddr))
continue;
/* Non OUI / registered MAC address */
mac_addr[4] = (sid[3] >> 8) & 0xff;
mac_addr[5] = (sid[3] >> 0) & 0xff;
- eth_setenv_enetaddr(ethaddr, mac_addr);
+ eth_env_set_enetaddr(ethaddr, mac_addr);
}
- if (!getenv("serial#")) {
+ if (!env_get("serial#")) {
snprintf(serial_string, sizeof(serial_string),
"%08x%08x", sid[0], sid[3]);
- setenv("serial#", serial_string);
+ env_set("serial#", serial_string);
}
}
}
int misc_init_r(void)
{
__maybe_unused int ret;
+ uint boot;
+
+ env_set("fel_booted", NULL);
+ env_set("fel_scriptaddr", NULL);
+ env_set("mmc_bootdev", NULL);
- setenv("fel_booted", NULL);
- setenv("fel_scriptaddr", NULL);
+ boot = sunxi_get_boot_device();
/* determine if we are running in FEL mode */
- if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
- setenv("fel_booted", "1");
+ if (boot == BOOT_DEVICE_BOARD) {
+ env_set("fel_booted", "1");
parse_spl_header(SPL_ADDR);
+ /* or if we booted from MMC, and which one */
+ } else if (boot == BOOT_DEVICE_MMC1) {
+ env_set("mmc_bootdev", "0");
+ } else if (boot == BOOT_DEVICE_MMC2) {
+ env_set("mmc_bootdev", "1");
}
setup_environment(gd->fdt_blob);
if (ret)
return ret;
#endif
- sunxi_musb_board_init();
+
+#ifdef CONFIG_USB_ETHER
+ usb_ether_init();
+#endif
return 0;
}
#endif
return 0;
}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ struct boot_file_head *spl = (void *)(ulong)SPL_ADDR;
+ const char *cmp_str = (void *)(ulong)SPL_ADDR;
+
+ /* Check if there is a DT name stored in the SPL header and use that. */
+ if (spl->dt_name_offset) {
+ cmp_str += spl->dt_name_offset;
+ } else {
+#ifdef CONFIG_DEFAULT_DEVICE_TREE
+ cmp_str = CONFIG_DEFAULT_DEVICE_TREE;
+#else
+ return 0;
+#endif
+ };
+
+/* Differentiate the two Pine64 board DTs by their DRAM size. */
+ if (strstr(name, "-pine64") && strstr(cmp_str, "-pine64")) {
+ if ((gd->ram_size > 512 * 1024 * 1024))
+ return !strstr(name, "plus");
+ else
+ return !!strstr(name, "plus");
+ } else {
+ return strcmp(name, cmp_str);
+ }
+}
+#endif
projects / platform / kernel / u-boot.git / blobdiff