+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014 Samsung Electronics
* Przemyslaw Marczak <p.marczak@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
#include <asm/arch/cpu.h>
+#include <dm.h>
#include <power/pmic.h>
+#include <power/regulator.h>
#include <power/max77686_pmic.h>
#include <errno.h>
+#include <mmc.h>
#include <usb.h>
-#include <usb/s3c_udc.h>
+#include <usb/dwc2_udc.h>
#include <samsung/misc.h>
#include "setup.h"
#endif
#ifdef CONFIG_SET_DFU_ALT_INFO
-char *get_dfu_alt_system(void)
+char *get_dfu_alt_system(char *interface, char *devstr)
{
- return getenv("dfu_alt_system");
+ return env_get("dfu_alt_system");
}
-char *get_dfu_alt_boot(void)
+char *get_dfu_alt_boot(char *interface, char *devstr)
{
+ struct mmc *mmc;
char *alt_boot;
+ int dev_num;
+
+ dev_num = simple_strtoul(devstr, NULL, 10);
+
+ mmc = find_mmc_device(dev_num);
+ if (!mmc)
+ return NULL;
+
+ if (mmc_init(mmc))
+ return NULL;
+
+ alt_boot = IS_SD(mmc) ? CONFIG_DFU_ALT_BOOT_SD :
+ CONFIG_DFU_ALT_BOOT_EMMC;
- switch (get_boot_mode()) {
- case BOOT_MODE_SD:
- alt_boot = CONFIG_DFU_ALT_BOOT_SD;
- break;
- case BOOT_MODE_EMMC:
- case BOOT_MODE_EMMC_SD:
- alt_boot = CONFIG_DFU_ALT_BOOT_EMMC;
- break;
- default:
- alt_boot = NULL;
- break;
- }
return alt_boot;
}
#endif
* MOUTc2c = 800 Mhz
* MOUTpwi = 108 MHz
*
- * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 400 (1)
+ * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 200 (3)
* sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1)
* aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1)
* sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5)
*/
- set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) |
+ set = G2D_ACP_RATIO(3) | C2C_RATIO(1) | PWI_RATIO(5) |
C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1);
clrsetbits_le32(&clk->div_dmc1, clr, set);
#endif
}
-static int pmic_init_max77686(void)
-{
- struct pmic *p = pmic_get("MAX77686_PMIC");
-
- if (pmic_probe(p))
- return -ENODEV;
-
- /* Set LDO Voltage */
- max77686_set_ldo_voltage(p, 20, 1800000); /* LDO20 eMMC */
- max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 SD */
- max77686_set_ldo_voltage(p, 22, 2800000); /* LDO22 eMMC */
-
- return 0;
-}
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-static void board_init_i2c(void)
-{
- /* I2C_0 */
- if (exynos_pinmux_config(PERIPH_ID_I2C0, PINMUX_FLAG_NONE))
- debug("I2C%d not configured\n", (I2C_0));
-}
-#endif
-
int exynos_early_init_f(void)
{
board_clock_init();
int exynos_init(void)
{
- /* The last MB of memory is reserved for secure firmware */
- gd->ram_size -= SZ_1M;
- gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= SZ_1M;
-
board_gpio_init();
return 0;
int exynos_power_init(void)
{
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- board_init_i2c();
-#endif
- pmic_init(I2C_0);
- pmic_init_max77686();
+ const char *mmc_regulators[] = {
+ "VDDQ_EMMC_1.8V",
+ "VDDQ_EMMC_2.8V",
+ "TFLASH_2.8V",
+ NULL,
+ };
+
+ if (regulator_list_autoset(mmc_regulators, NULL, true))
+ pr_err("Unable to init all mmc regulators");
return 0;
}
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
- struct pmic *p_pmic;
+ struct udevice *dev;
+ int ret;
- p_pmic = pmic_get("MAX77686_PMIC");
- if (!p_pmic)
- return -ENODEV;
-
- if (pmic_probe(p_pmic))
- return -1;
+ ret = regulator_get_by_platname("VDD_UOTG_3.0V", &dev);
+ if (ret) {
+ pr_err("Regulator get error: %d", ret);
+ return ret;
+ }
if (on)
- return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+ return regulator_set_mode(dev, OPMODE_ON);
else
- return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+ return regulator_set_mode(dev, OPMODE_LPM);
}
-struct s3c_plat_otg_data s5pc210_otg_data = {
+struct dwc2_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4X12_USBPHY_BASE,
.regs_otg = EXYNOS4X12_USBOTG_BASE,
int board_usb_init(int index, enum usb_init_type init)
{
#ifdef CONFIG_CMD_USB
- struct pmic *p_pmic;
+ struct udevice *dev;
+ int ret;
/* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
/* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
/* Power off and on BUCK8 for LAN9730 */
debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
- p_pmic = pmic_get("MAX77686_PMIC");
- if (p_pmic && !pmic_probe(p_pmic)) {
- max77686_set_buck_voltage(p_pmic, 8, 750000);
- max77686_set_buck_voltage(p_pmic, 8, 3300000);
+ ret = regulator_get_by_platname("VCC_P3V3_2.85V", &dev);
+ if (ret) {
+ pr_err("Regulator get error: %d", ret);
+ return ret;
}
-#endif
+ ret = regulator_set_enable(dev, true);
+ if (ret) {
+ pr_err("Regulator %s enable setting error: %d", dev->name, ret);
+ return ret;
+ }
+ ret = regulator_set_value(dev, 750000);
+ if (ret) {
+ pr_err("Regulator %s value setting error: %d", dev->name, ret);
+ return ret;
+ }
+
+ ret = regulator_set_value(dev, 3300000);
+ if (ret) {
+ pr_err("Regulator %s value setting error: %d", dev->name, ret);
+ return ret;
+ }
+#endif
debug("USB_udc_probe\n");
- return s3c_udc_probe(&s5pc210_otg_data);
+ return dwc2_udc_probe(&s5pc210_otg_data);
}
#endif
-
-void reset_misc(void)
-{
- /* Reset eMMC*/
- gpio_set_value(EXYNOS4X12_GPIO_K12, 0);
- mdelay(10);
- gpio_set_value(EXYNOS4X12_GPIO_K12, 1);
-}
projects / platform / kernel / u-boot.git / blobdiff