global: Move remaining CONFIG_SYS_* to CFG_SYS_*

[platform/kernel/u-boot.git] / board / freescale / t104xrdb / ddr.c

diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index 34c9224..02ddb66 100644 (file)
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -1,35 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Copyright 2021 NXP
  */
 
 #include <common.h>
 #include <i2c.h>
 #include <hwconfig.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
 #include <asm/mmu.h>
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
+#include <linux/delay.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
-               unsigned int controller_number,
-               unsigned int dimm_number)
-{
-       const char dimm_model[] = "RAW timing DDR";
-
-       if ((controller_number == 0) && (dimm_number == 0)) {
-               memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
-               memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
-               memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
-       }
-
-       return 0;
-}
-
 void fsl_ddr_board_options(memctl_options_t *popts,
                                dimm_params_t *pdimm,
                                unsigned int ctrl_num)
@@ -89,7 +79,14 @@ found:
         * Factors to consider for half-strength driver enable:
         *      - number of DIMMs installed
         */
+#ifdef CONFIG_SYS_FSL_DDR4
+       popts->half_strength_driver_enable = 1;
+       /* optimize cpo for erratum A-009942 */
+       popts->cpo_sample = 0x59;
+#else
+       popts->cpo_sample = 0x54;
        popts->half_strength_driver_enable = 0;
+#endif
        /*
         * Write leveling override
         */
@@ -105,24 +102,47 @@ found:
        popts->zq_en = 1;
 
        /* DHC_EN =1, ODT = 75 Ohm */
-       popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
-       popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
+#ifdef CONFIG_SYS_FSL_DDR4
+       popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM);
+       popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) |
+               DDR_CDR2_VREF_OVRD(70);       /* Vref = 70% */
+#else
+       popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+       popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+#endif
+}
+
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+       void __iomem *cpld_base = (void *)CFG_SYS_CPLD_BASE;
+
+       /* does not provide HW signals for power management */
+       clrbits_8(cpld_base + 0x17, 0x40);
+       /* Disable MCKE isolation */
+       gpio_set_value(2, 0);
+       udelay(1);
 }
+#endif
 
-phys_size_t initdram(int board_type)
+int dram_init(void)
 {
        phys_size_t dram_size;
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
        puts("Initializing....using SPD\n");
-
        dram_size = fsl_ddr_sdram();
-
+#else
+       dram_size =  fsl_ddr_sdram_size();
+#endif
        dram_size = setup_ddr_tlbs(dram_size / 0x100000);
        dram_size *= 0x100000;
 
-#else
-       dram_size =  fsl_ddr_sdram_size();
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+       fsl_dp_resume();
 #endif
-       return dram_size;
+
+       gd->ram_size = dram_size;
+
+       return 0;
 }