Add GPL-2.0+ SPDX-License-Identifier to source files

[platform/kernel/u-boot.git] / board / freescale / mpc8568mds / mpc8568mds.c

diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index a504f8a..2f9417f 100644 (file)
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -1,25 +1,9 @@
 /*
- * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 #include <common.h>
@@ -147,12 +131,10 @@ local_bus_init(void)
        volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
        uint clkdiv;
-       uint lbc_hz;
        sys_info_t sysinfo;
 
        get_sys_info(&sysinfo);
        clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
-       lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
        gur->lbiuiplldcr1 = 0x00078080;
        if (clkdiv == 16) {
@@ -259,17 +241,9 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = {
 };
 #endif
 
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-       config_table: pci_mpc8568mds_config_table,
-#endif
-};
+static struct pci_controller pci1_hose;
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif  /* CONFIG_PCIE1 */
-
 /*
  * pib_init() -- Initialize the PCA9555 IO expander on the PIB board
  */
@@ -310,19 +284,18 @@ pib_init(void)
        i2c_write(0x27, 0x3, 1, &val8, 1);
 
        asm("eieio");
+       i2c_set_bus_num(orig_i2c_bus);
 }
 
 #ifdef CONFIG_PCI
 void pci_init_board(void)
 {
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       struct fsl_pci_info pci_info[2];
+       int first_free_busno = 0;
+#ifdef CONFIG_PCI1
+       struct fsl_pci_info pci_info;
        u32 devdisr, pordevsr, io_sel;
        u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
-       int first_free_busno = 0;
-       int num = 0;
-
-       int pcie_ep, pcie_configured;
 
        devdisr = in_be32(&gur->devdisr);
        pordevsr = in_be32(&gur->pordevsr);
@@ -331,15 +304,19 @@ void pci_init_board(void)
 
        debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 
-#ifdef CONFIG_PCI1
        pci_speed = 66666000;
        pci_32 = 1;
        pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
        pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
 
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-               SET_STD_PCI_INFO(pci_info[num], 1);
-               pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+               SET_STD_PCI_INFO(pci_info, 1);
+               set_next_law(pci_info.mem_phys,
+                       law_size_bits(pci_info.mem_size), pci_info.law);
+               set_next_law(pci_info.io_phys,
+                       law_size_bits(pci_info.io_size), pci_info.law);
+
+               pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
                printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
@@ -347,9 +324,12 @@ void pci_init_board(void)
                        pci_clk_sel ? "sync" : "async",
                        pci_agent ? "agent" : "host",
                        pci_arb ? "arbiter" : "external-arbiter",
-                       pci_info[num].regs);
+                       pci_info.regs);
 
-               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+#ifndef CONFIG_PCI_PNP
+               pci1_hose.config_table = pci_mpc8568mds_config_table;
+#endif
+               first_free_busno = fsl_pci_init_port(&pci_info,
                                        &pci1_hose, first_free_busno);
        } else {
                printf("PCI: disabled\n");
@@ -360,26 +340,7 @@ void pci_init_board(void)
        setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
 #endif
 
-#ifdef CONFIG_PCIE1
-       pcie_configured = is_serdes_configured(PCIE1);
-
-       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               SET_STD_PCIE_INFO(pci_info[num], 1);
-               pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
-                               pcie_ep ? "Endpoint" : "Root Complex",
-                               pci_info[num].regs);
-
-               first_free_busno = fsl_pci_init_port(&pci_info[num++],
-                                       &pcie1_hose, first_free_busno);
-       } else {
-               printf("PCIE1: disabled\n");
-       }
-
-       puts("\n");
-#else
-       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
+       fsl_pcie_init_board(first_free_busno);
 }
 #endif /* CONFIG_PCI */