#include <ioports.h>
#include <mpc83xx.h>
#include <i2c.h>
-#include <spd.h>
#include <miiphy.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
-#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
-#else
#include <asm/mmu.h>
-#endif
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
int board_early_init_f(void)
{
- u8 *bcsr = (u8 *)CFG_BCSR;
- const immap_t *immr = (immap_t *)CFG_IMMR;
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
+ const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
/* Enable flash write */
bcsr[0xa] &= ~0x04;
- /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */
- if (immr->sysconf.spridr == SPR_8360_REV20 ||
- immr->sysconf.spridr == SPR_8360E_REV20 ||
- immr->sysconf.spridr == SPR_8360_REV21 ||
- immr->sysconf.spridr == SPR_8360E_REV21)
+ /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
+ if (REVID_MAJOR(immr->sysconf.spridr) == 2)
bcsr[0xe] = 0x30;
/* Enable second UART */
int fixed_sdram(void);
void sdram_init(void);
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
/* DDR SDRAM - Main SODIMM */
- im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
msize = spd_sdram();
#else
************************************************************************/
int fixed_sdram(void)
{
- volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
- msize = CFG_DDR_SIZE;
+ msize = CONFIG_SYS_DDR_SIZE;
for (ddr_size = msize << 20, ddr_size_log2 = 0;
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
if (ddr_size & 1) {
}
im->sysconf.ddrlaw[0].ar =
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-#if (CFG_DDR_SIZE != 256)
+#if (CONFIG_SYS_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
#ifdef CONFIG_DDR_II
- im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
- im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
- im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
- im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
- im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
- im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
- im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
- im->ddr.sdram_mode = CFG_DDR_MODE;
- im->ddr.sdram_mode2 = CFG_DDR_MODE2;
- im->ddr.sdram_interval = CFG_DDR_INTERVAL;
- im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+ im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+ im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+ im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+ im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
#else
im->ddr.csbnds[0].csbnds = 0x00000007;
im->ddr.csbnds[1].csbnds = 0x0008000f;
- im->ddr.cs_config[0] = CFG_DDR_CONFIG;
- im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+ im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
+ im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG;
- im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
- im->ddr.sdram_cfg = CFG_DDR_CONTROL;
+ im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
- im->ddr.sdram_mode = CFG_DDR_MODE;
- im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+ im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
#endif
udelay(200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
return msize;
}
-#endif /*!CFG_SPD_EEPROM */
+#endif /*!CONFIG_SYS_SPD_EEPROM */
int checkboard(void)
{
/*
* if MPC8360EMDS is soldered with SDRAM
*/
-#if defined(CFG_BR2_PRELIM) \
- && defined(CFG_OR2_PRELIM) \
- && defined(CFG_LBLAWBAR2_PRELIM) \
- && defined(CFG_LBLAWAR2_PRELIM)
+#if defined(CONFIG_SYS_BR2_PRELIM) \
+ && defined(CONFIG_SYS_OR2_PRELIM) \
+ && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
+ && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
/*
* Initialize SDRAM memory on the Local Bus.
*/
void sdram_init(void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile lbus83xx_t *lbc = &immap->lbus;
- uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+ uint *sdram_addr = (uint *) CONFIG_SYS_LBC_SDRAM_BASE;
/*
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
*/
/*setup mtrpt, lsrt and lbcr for LB bus */
- lbc->lbcr = CFG_LBC_LBCR;
- lbc->mrtpr = CFG_LBC_MRTPR;
- lbc->lsrt = CFG_LBC_LSRT;
+ lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+ lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+ lbc->lsrt = CONFIG_SYS_LBC_LSRT;
asm("sync");
/*
* Configure the SDRAM controller Machine Mode Register.
*/
- lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */
- lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* Normal Operation */
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* Precharge All Banks */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
/*
* We need do 8 times auto refresh operation.
*/
- lbc->lsdmr = CFG_LBC_LSDMR_2;
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
asm("sync");
*sdram_addr = 0xff; /* 1 times */
udelay(100);
udelay(100);
/* Mode register write operation */
- lbc->lsdmr = CFG_LBC_LSDMR_4;
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
asm("sync");
*(sdram_addr + 0xcc) = 0xff;
udelay(100);
/* Normal operation */
- lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
+ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
- const immap_t *immr = (immap_t *)CFG_IMMR;
+ const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
* if on mpc8360ea rev. 2.1,
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
*/
- if (immr->sysconf.spridr == SPR_8360_REV21 ||
- immr->sysconf.spridr == SPR_8360E_REV21) {
+ if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
+ (REVID_MINOR(immr->sysconf.spridr) == 1)) {
int nodeoffset;
const char *prop;
- const char *path;
+ int path;
- nodeoffset = fdt_path_offset(fdt, "/aliases");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
#if defined(CONFIG_HAS_ETH0)
/* fixup UCC 1 if using rgmii-id mode */
- path = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
- if (path) {
- prop = fdt_getprop(blob, nodeoffset,
- "phy-connection-type", 0);
+ prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (prop) {
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path,
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
- fdt_setprop(blob, nodeoffset, "phy-connection-type",
- "rgmii-rxid", sizeof("rgmii-rxid"));
+ fdt_setprop(blob, path,
+ "phy-connection-type",
+ "rgmii-rxid",
+ sizeof("rgmii-rxid"));
}
#endif
#if defined(CONFIG_HAS_ETH1)
/* fixup UCC 2 if using rgmii-id mode */
- path = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
- if (path) {
- prop = fdt_getprop(blob, nodeoffset,
- "phy-connection-type", 0);
+ prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (prop) {
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path,
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
- fdt_setprop(blob, nodeoffset, "phy-connection-type",
- "rgmii-rxid", sizeof("rgmii-rxid"));
+ fdt_setprop(blob, path,
+ "phy-connection-type",
+ "rgmii-rxid",
+ sizeof("rgmii-rxid"));
}
#endif
}
projects / platform / kernel / u-boot.git / blobdiff