rename CFG_ macros to CONFIG_SYS

[platform/kernel/u-boot.git] / board / esd / cms700 / cms700.c

diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 806c755..5709d45 100644 (file)
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -69,9 +69,9 @@ int board_early_init_f (void)
        /*
         * Reset CPLD via GPIO12 (CS3) pin
         */
-       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET);
+       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET);
        udelay(1000); /* wait 1ms */
-       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET);
+       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET);
        udelay(1000); /* wait 1ms */
 
        return 0;
@@ -86,7 +86,7 @@ int misc_init_r (void)
        /*
         * Setup and enable EEPROM write protection
         */
-       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
+       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
 
        return (0);
 }
@@ -101,8 +101,8 @@ int checkboard (void)
        char str[64];
        int flashcnt;
        int delay;
-       volatile unsigned char *led_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1000);
-       volatile unsigned char *ver_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1001);
+       volatile unsigned char *led_reg = (unsigned char *)((ulong)CONFIG_SYS_PLD_BASE + 0x1000);
+       volatile unsigned char *ver_reg = (unsigned char *)((ulong)CONFIG_SYS_PLD_BASE + 0x1001);
 
        puts ("Board: ");
 
@@ -132,7 +132,7 @@ int checkboard (void)
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(CFG_EEPROM_WREN)
+#if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
  *                    0: disable write
@@ -143,23 +143,23 @@ int checkboard (void)
  */
 int eeprom_write_enable (unsigned dev_addr, int state)
 {
-       if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+       if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
                return -1;
        } else {
                switch (state) {
                case 1:
                        /* Enable write access, clear bit GPIO_SINT2. */
-                       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP);
+                       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
                        state = 0;
                        break;
                case 0:
                        /* Disable write access, set bit GPIO_SINT2. */
-                       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
+                       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
                        state = 0;
                        break;
                default:
                        /* Read current status back. */
-                       state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP));
+                       state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
                        break;
                }
        }
@@ -173,21 +173,21 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
        if (query) {
                /* Query write access state. */
-               state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+               state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
                if (state < 0) {
                        puts ("Query of write access state failed.\n");
                } else {
                        printf ("Write access for device 0x%0x is %sabled.\n",
-                               CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+                               CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
                        state = 0;
                }
        } else {
                if ('0' == argv[1][0]) {
                        /* Disable write access. */
-                       state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+                       state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
                } else {
                        /* Enable write access. */
-                       state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+                       state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
                }
                if (state < 0) {
                        puts ("Setup of write access state failed.\n");
@@ -200,7 +200,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(eepwren,    2,      0,      do_eep_wren,
           "eepwren - Enable / disable / query EEPROM write access\n",
           NULL);
-#endif /* #if defined(CFG_EEPROM_WREN) */
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
 
 /* ------------------------------------------------------------------------- */