rename CFG_ macros to CONFIG_SYS

[platform/kernel/u-boot.git] / board / cm5200 / cm5200.c

diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 24e8db0..9e2f1a5 100644 (file)
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -57,7 +57,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static hw_id_t hw_id;
 
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 /*
  * Helper function to initialize SDRAM controller.
  */
@@ -87,7 +87,7 @@ static void sdram_start(int hi_addr, mem_conf_t *mem_conf)
        /* normal operation */
        *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit;
 }
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 
 /*
@@ -117,7 +117,7 @@ static mem_conf_t* get_mem_config(int board_type)
 phys_size_t initdram(int board_type)
 {
        ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
        ulong test1, test2;
        mem_conf_t *mem_conf;
 
@@ -131,9 +131,9 @@ phys_size_t initdram(int board_type)
        *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2;
 
        sdram_start(0, mem_conf);
-       test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+       test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        sdram_start(1, mem_conf);
-       test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+       test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        if (test1 > test2) {
                sdram_start(0, mem_conf);
                dramsize = test1;
@@ -150,14 +150,14 @@ phys_size_t initdram(int board_type)
                        __builtin_ffs(dramsize >> 20) - 1;
        } else
                *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
        /* retrieve size of memory connected to SDRAM CS0 */
        dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
        if (dramsize >= 0x13)
                dramsize = (1 << (dramsize - 0x13)) << 20;
        else
                dramsize = 0;
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
        /*
         * On MPC5200B we need to set the special configuration delay in the
@@ -178,7 +178,7 @@ static void read_hw_id(hw_id_t hw_id)
 {
        int i;
        for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
-               if (i2c_read(CFG_I2C_EEPROM,
+               if (i2c_read(CONFIG_SYS_I2C_EEPROM,
                                hw_id_format[i].offset,
                                2,
                                (uchar *)&hw_id[i][0],
@@ -298,7 +298,7 @@ int checkboard(void)
         * also use a little trick to silence I2C-related output.
         */
        gd->flags |= GD_FLG_SILENT;
-       i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+       i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
        gd->flags &= ~GD_FLG_SILENT;
 
        read_hw_id(hw_id_tmp);
@@ -363,7 +363,7 @@ int misc_init_r(void)
        char hostname[MODULE_NAME_MAXLEN];
 
        /* Read ethaddr from EEPROM */
-       if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+       if (i2c_read(CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
                sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
                        buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
                /* Check if MAC addr is owned by Schindler */
@@ -377,7 +377,7 @@ int misc_init_r(void)
                }
        } else {
                printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
-                       " device at address %02X:%04X\n", CFG_I2C_EEPROM,
+                       " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
                        CONFIG_MAC_OFFSET);
        }
 #endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */